Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Fri Apr 19, 2024 1:32 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: Unusual Cocobolo Set.
PostPosted: Mon Jan 21, 2019 3:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5418
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Bought an unusual looking Coco set from a retiring luthier many moons ago.
Never seen or heard of this in Cocobolo - anyone seem anything like this before?
The wood is dry.
Looks like flame or maybe bee's wing figure?
The whole set is perfectly quartered and the figure is all over but difficult to photograph with my poor camera skills.


You do not have the required permissions to view the files attached to this post.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 3:23 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Mar 11, 2008 12:28 pm
Posts: 383
First name: William
Last Name: Snyder
City: Brooklyn
State: NY
Country: United States
Focus: Build
Status: Amateur
Yeah, I remember seeing bees wing coco sets around on several occasions 16-20 years ago, when it was still abundant and (relatively) cheap.
I was mostly window shopping back then as I didn't start my first guitar until 2004 (after reading about it and looking at wood for 7-8 years).
I did buy a coco board when I was in college, sometime around 2000, for $90 shipped. It was mostly quartered, had nice ink lines and was big enough to get 4 sets and some trim out of. I remember thinking I was smart because nice sets at that time were $70-80 a piece...I still haven't resawn that board.



These users thanked the author WilliamS for the post: Colin North (Mon Jan 21, 2019 3:30 pm)
Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 3:38 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Need my address? I'd like it by Friday...


Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 3:42 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5418
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
fingerstyle1978 wrote:
Need my address? I'd like it by Friday...

There's a little chance I'm afraid Joey.....

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 4:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5418
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
WilliamS wrote:
Yeah, I remember seeing bees wing coco sets around on several occasions 16-20 years ago, when it was still abundant and (relatively) cheap.
I was mostly window shopping back then as I didn't start my first guitar until 2004 (after reading about it and looking at wood for 7-8 years).
I did buy a coco board when I was in college, sometime around 2000, for $90 shipped. It was mostly quartered, had nice ink lines and was big enough to get 4 sets and some trim out of. I remember thinking I was smart because nice sets at that time were $70-80 a piece...I still haven't resawn that board.

Before my time then!

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 5:03 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Nice set!

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson



These users thanked the author Rod True for the post: Colin North (Mon Jan 21, 2019 5:18 pm)
Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 6:49 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Nov 12, 2014 10:02 am
Posts: 513
First name: Daniel
Last Name: Petrzelka
State: Washington
Country: United States
Focus: Build
That is really nice looking.



These users thanked the author dpetrzelka for the post: Colin North (Mon Jan 21, 2019 6:51 pm)
Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 7:47 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Jan 04, 2005 10:03 am
Posts: 6680
Location: Abbotsford, BC Canada
Got a picture of the sides? They might be a bit challenging to bend... curl is essentially run out (for lack of the actual term) and with the bees wing style of curl you have it might blow out when bending...


Sent from my iPhone using Tapatalk

_________________
My Facebook Guitar Page

"There's really no wrong way, as long as the results are what's desired." Charles Fox

"We have to constantly remind ourselves what we're doing....No Luthier is putting a man on the moon!" Harry Fleishman

"Generosity is always different in the eye of the person who didn't receive anything, but who wanted some." Waddy Thomson



These users thanked the author Rod True for the post: Colin North (Mon Jan 21, 2019 8:22 pm)
Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 8:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5418
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
Rod True wrote:
Got a picture of the sides? They might be a bit challenging to bend... curl is essentially run out (for lack of the actual term) and with the bees wing style of curl you have it might blow out when bending...


Sent from my iPhone using Tapatalk

Sides are buried somewhere behind heavy awkward to move object, maybe have a look tomorrow - it's 1:30 a.m.
I think localised runout is essentially a good description.
Thanks for the warning, I'll be using SS, keep down the water, (and call on the gods of wood bending!) Either that or keep it as a retirement fund!
Any other suggestions to help welcome.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Mon Jan 21, 2019 8:36 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3329
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Can’t wait to see that one under a finish!


Sent from my iPhone using Tapatalk Pro

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
PostPosted: Tue Jan 22, 2019 6:26 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5418
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
bcombs510 wrote:
Can’t wait to see that one under a finish!


Sent from my iPhone using Tapatalk Pro


Wouldn't hold you breath Brad, no specific plan as yet, couple of other builds and a course hopefully first at least

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.



These users thanked the author Colin North for the post: bcombs510 (Tue Jan 22, 2019 7:22 am)
Top
 Profile  
 
PostPosted: Wed Jan 23, 2019 2:03 pm 
Offline
Koa
Koa

Joined: Sun Jun 20, 2010 2:52 pm
Posts: 519
Focus: Build
Status: Professional
Yes, seen this before, looks nice, but of course some interlocking grain figure...


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 106 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
cron
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com