| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Stewmac "Cryo" fret wire http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=51460 |
Page 1 of 1 |
| Author: | dberkowitz [ Sat Jan 12, 2019 1:50 pm ] |
| Post subject: | Stewmac "Cryo" fret wire |
Has anyone played with this stuff? How hard is it? How does it compare to the Jescar? |
|
| Author: | fingerstyle1978 [ Sat Jan 12, 2019 8:24 pm ] |
| Post subject: | Re: Stewmac "Cryo" fret wire |
I ordered some but haven't used it yet. I usually use Jescar EVO Gold. I won't be fretting for a couple weeks but I'll keep this post in mind when I do. |
|
| Author: | fingerstyle1978 [ Mon Jan 21, 2019 2:00 pm ] |
| Post subject: | Re: Stewmac "Cryo" fret wire |
dberkowitz wrote: Has anyone played with this stuff? How hard is it? How does it compare to the Jescar? It’s not as hard as EVO Gold, seems a bit harder than regular fret wire but not enough to move away from the Jescar . If I had a client that insisted on non gold frets and tuners I’d use it but until then I’ll be sticking to EVO Gold. Sent from my iPhone using Tapatalk |
|
| Author: | dberkowitz [ Thu Jan 24, 2019 2:37 pm ] |
| Post subject: | Re: Stewmac "Cryo" fret wire |
I received a sleeve of comparable medium "cryogenic" fretwire similar in dimensions to the Jescar. I can't comment on durability, but spending a few minutes cutting little bits of it off and the Jescar, I can't really notice a difference. Whether it is more durable is another question entirely. But there wasn't any aha moment of clarity that it was something remarkably different. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|