Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 2:33 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 12 posts ] 
Author Message
 Post subject: a slight problem...
PostPosted: Thu Sep 27, 2018 3:05 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I've got a slight problem. I made my headstock about 7/16" thick. A little thin perhaps... But, I did not expect that the Gotoh 510 tuners wouldn't go down that far. It looks like I'm about 1/32" too thin. So, they don't tighten down to 7/16". I'm thinking maybe one thing I could do is grind the threaded insert down slightly on my grinder. As long as I don't foul the threads I think that could work. I suppose another remedy would be to use some different tuners, but I sure like the Gotoh 510s and this build is calling out for them. Any thoughts or suggestions?


You do not have the required permissions to view the files attached to this post.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 3:13 pm 
Offline
Cocobolo
Cocobolo

Joined: Sat Dec 28, 2013 10:06 am
Posts: 251
First name: Mike
Last Name: Spector
City: ORANGE
State: TX
Zip/Postal Code: 77632
Country: USA
Focus: Build
Status: Amateur
I can't tell much about the veneer, but possibly scrap the old one and put on a thicker one.



These users thanked the author surveyor for the post: olmorton71 (Thu Sep 27, 2018 7:14 pm)
Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 3:15 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sun Mar 06, 2011 12:04 am
Posts: 5743
First name: Chris
Last Name: Pile
City: Wichita
State: Kansas
Country: Good old US of A
Focus: Repair
Status: Professional
Short term fix - washers.

_________________
"Act your age, not your shoe size" - Prince


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 3:21 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I just completed the finishing on this one, probably the best finish I've done. I'm sure not going to remove and replace the headplate at this point... and adding a washer wouldn't be very professional....

So... how about grinding down the threaded insert. Am I likely to booger it up? Does anyone know of other tuning machines that will tighten down to 7/16"?

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 3:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7241
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
Look for some different tuners?

_________________
Steve Smith
"Music is what feelings sound like"


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 4:16 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Feb 20, 2008 7:15 pm
Posts: 7219
First name: Ed
Last Name: Bond
City: Vancouver
Country: Canada
Focus: Build
Status: Professional
Well, try it. If you crap out a bushing they're easy to come by. But I'd think that would probably work...


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 4:51 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Okay - For anyone that is interested... or has this problem in the future. I went ahead and ground down the threaded inserts for these tuners to fit my "thinnish" headstock and they fit perfectly. Sometimes you have to not be afraid to try something...


You do not have the required permissions to view the files attached to this post.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com



These users thanked the author sdsollod for the post (total 4): Robbie_McD (Thu Sep 27, 2018 8:33 pm) • J De Rocher (Thu Sep 27, 2018 6:25 pm) • bcombs510 (Thu Sep 27, 2018 5:46 pm) • Pmaj7 (Thu Sep 27, 2018 5:31 pm)
Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 4:58 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 2953
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
You might want to measure the length of the screws and make sure they won’t poke through the front.


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 5:05 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Nope. Plenty of room. Its not that thin...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 5:46 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Jul 27, 2015 8:21 am
Posts: 3288
First name: Brad
Last Name: Combs
Focus: Build
Status: Amateur
Nice workaround.


Sent from my iPhone using Tapatalk

_________________
Insta - https://www.instagram.com/cbcguitars/
Facebook - https://www.facebook.com/cbcguitars


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 7:52 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
What about adding another layer to the back strap?

Ed


Top
 Profile  
 
 Post subject: Re: a slight problem...
PostPosted: Thu Sep 27, 2018 9:27 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
The guitar is finished. After the endless finishing process I have no interest in going back to add 1/16”. Besides, it looks fine, good in fact and the problem is solved...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 12 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 68 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com