Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 9:17 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 15 posts ] 
Author Message
 Post subject: Maple Fingerboard?
PostPosted: Mon Sep 10, 2018 4:11 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I love the look of this maple guitar in this link. It is constructed entirely of maple (except for the top). I'm thinking about building a guitar in approximately this fashion, but in an OM shape.

https://www.dreamguitars.com/shop/instr ... pruce.html

I have some highly figured maple that I have already used to build a 000 12 fret with leopard wood binding, leopard for the center of the 3-piece back, cherry neck, and cocobolo bridge and fingerboard. It is hung up, waiting for the finish to cure. When its done I'll post photos.

This time I want to use maple for the neck, binding (w/ black purfling), fingerboard, and bridge. I'm quite certain that the maple I have is soft maple. It worked fine for the back and sides of the last one, however, I'm wondering about the fingerboard... Should I source some "Hard" maple for the fingerboard? What does Fender use for thier fingerboards? As long as the frets stay in the board...

Any thoughts, comments, or suggestions?


You do not have the required permissions to view the files attached to this post.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Mon Sep 10, 2018 4:35 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Sep 08, 2010 12:17 am
Posts: 1263
First name: John
Last Name: Arnold
City: Newport
State: TN
Zip/Postal Code: 37821
Country: USA
Focus: Repair
Status: Professional
Get some hard maple (sugar maple) for the fingerboard. That is what Fender uses, and it will hold frets better and wear better than soft maple.
If you are so inclined, you can use birdseye. That figure does not occur in soft maple.

_________________
John



These users thanked the author John Arnold for the post: Clinchriver (Sat Sep 15, 2018 4:37 am)
Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Mon Sep 10, 2018 4:55 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 3081
The box is probably red maple, so you will want to use red for the neck to match the color. Another reason is you just don't want to carve sugar maple. It'll wear you out. Use sugar for the fretboard. How to keep it from discoloring is another story...


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Mon Sep 10, 2018 6:20 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Edit

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)


Last edited by Woodie G on Fri Sep 14, 2018 8:03 pm, edited 1 time in total.

Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Tue Sep 11, 2018 7:41 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
Mya moe uses e . hard rock maple on their ukes . Plan to use some e. maple from vt circa 1960.


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Tue Sep 11, 2018 8:09 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
+1 on the sugar maple. I think my 3rd or 4th guitar was an all maple guitar with a mahogany top. Maple fretboard and bridge. It was an interesting looking guitar. I liked it. My nephew has that one. You definitely will want to finish the maple fretbaord (nd bridge).

I learned something today, I didn't know that birdseye only shows up in hard maple.


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Tue Sep 11, 2018 8:52 am 
Offline
Contributing Member
Contributing Member

Joined: Sun May 19, 2013 10:22 am
Posts: 727
First name: Brian
Last Name: McDonald
City: Okanagan Centre
State: British Columbia
Zip/Postal Code: V4V2H6
Country: Canada
Focus: Build
Status: Amateur
I saw that dream guitar at the VIGF, it was a real eye catcher.

B

_________________
My memory is so good, sometimes I remember things that never happened.


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Tue Sep 11, 2018 8:58 am 
Offline
Koa
Koa
User avatar

Joined: Tue Feb 26, 2008 6:19 am
Posts: 1322
First name: Richard
Last Name: Hutchings
City: Warwick
State: RI
Zip/Postal Code: 02889
Country: United States
Focus: Build
Status: Amateur
Man I'm liking that!!! What kind of finish? I imaging lacquer wouldn't hold up. Polyurethane?

_________________
Hutch

Get the heck off the couch and go build a guitar!!!!


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Thu Sep 13, 2018 8:28 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
Fender guitars used a lot of rift. and non, and quartersawn e , hard rock maple for fretboards. They eventually get grungy and need cleaning, I would use Poly, .Am sure the repair folks could tell you what they refinish the maple FB with e. g. josh white who occassionaly posts on the OLF


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Thu Sep 13, 2018 11:10 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Has anyone put finish on the fretboard before Freting? It seems like it would look cleaner.

Sent from my SM-N910T using Tapatalk

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Thu Sep 13, 2018 11:20 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
I always finish the fretboard first. Makes it a lot easier to clean up glue squeeze out.



These users thanked the author jfmckenna for the post: Pmaj7 (Fri Sep 14, 2018 6:57 pm)
Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Thu Sep 13, 2018 12:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Wed Oct 08, 2008 11:36 am
Posts: 7240
Location: Southeast US
City: Lenoir City
State: TN
Zip/Postal Code: 37772
Country: US
Focus: Repair
jfmckenna wrote:
I always finish the fretboard first. Makes it a lot easier to clean up glue squeeze out.

Yep, me too

_________________
Steve Smith
"Music is what feelings sound like"



These users thanked the author SteveSmith for the post: Pmaj7 (Fri Sep 14, 2018 7:00 pm)
Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Fri Sep 14, 2018 4:52 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
We fret after assembly, so the board stays unfinished until the neck is on, then level, seal with epoxy, and three coats lacquer, fret, trim/level/crown then final three coats.

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)



These users thanked the author Woodie G for the post: Pmaj7 (Fri Sep 14, 2018 7:00 pm)
Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Fri Sep 14, 2018 7:00 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 2246
Location: Seattle WA
Focus: Build
Status: Semi-pro
Woodie G wrote:
We fret after assembly, so the board stays unfinished until the neck is on, then level, seal with epoxy, and three coats lacquer, fret, trim/level/crown then final three coats.


Do you wipe the lacquer off the Frets after each of the last three coats, or scrape it off after it's dry?

_________________
Pat


Top
 Profile  
 
 Post subject: Re: Maple Fingerboard?
PostPosted: Fri Sep 14, 2018 8:04 pm 
Offline
Koa
Koa
User avatar

Joined: Sat Jan 19, 2013 7:33 am
Posts: 1831
First name: Willard
Last Name: Guthrie
City: Cumberland
State: Maryland 21502
Zip/Postal Code: 21502
Country: United State
Focus: Repair
Status: Semi-pro
Gets cleaned off with final crown and polish, just like Telecaster.

_________________
We have become a civilization that elevates idiots, prostitutes, and clowns. Am I still to defend it? Yes, for its principles. Yes, for what it was. Yes, for what it still may be.

-Mark Helprin, The Oceans and the Stars: A Sea Story, A War Story, A Love Story (A Novel)



These users thanked the author Woodie G for the post: Pmaj7 (Fri Sep 14, 2018 9:11 pm)
Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: BradHall and 57 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com