Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
Fat Boy. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=50794 |
Page 1 of 1 |
Author: | Colin North [ Sun Jul 08, 2018 3:42 pm ] |
Post subject: | Fat Boy. |
I've been looking at this, on paper, and as I built the box. for too long. My first "own design" body shape, just throwing it open for thoughts/opinions. 20" long, upper bout 12 1/8". lower bout 16 1/8" |
Author: | bionta [ Sun Jul 08, 2018 4:10 pm ] |
Post subject: | Re: Fat Boy. |
I like it. Looks robust. |
Author: | Andy Bounsall [ Sun Jul 08, 2018 4:26 pm ] |
Post subject: | Re: Fat Boy. |
It’s a nice shape. I like it. Have you investigated availability of a suitably sized case? |
Author: | Michaeldc [ Sun Jul 08, 2018 4:30 pm ] |
Post subject: | Re: Fat Boy. |
Who you callin Fat boy...?! It's a nice shape. You can always massage it a bit later if you find it lacking somehow. |
Author: | Colin North [ Sun Jul 08, 2018 5:28 pm ] |
Post subject: | Re: Fat Boy. |
Andy Bounsall wrote: It’s a nice shape. I like it. Have you investigated availability of a suitably sized case? Yup, most dread cases seem about right. |
Author: | Haans [ Sun Jul 08, 2018 5:31 pm ] |
Post subject: | Re: Fat Boy. |
Kinda reminds me of a 14 fret Stella... Good luck with it! |
Author: | Joe Beaver [ Mon Jul 09, 2018 6:15 pm ] |
Post subject: | Re: Fat Boy. |
I like the shape of it, beautiful rosette also!!! |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |