LOL, here we go again.
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Abranet standard or 'max' for drumsanders? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=50544 |
Page 1 of 1 |
| Author: | Fasterthanlight [ Sat Apr 21, 2018 4:15 am ] |
| Post subject: | Abranet standard or 'max' for drumsanders? |
What do folks use? The max is just thicker and tougher right? G. |
|
| Author: | Fasterthanlight [ Sun Apr 22, 2018 2:25 am ] |
| Post subject: | Re: Abranet standard or 'max' for drumsanders? |
No one? No one uses it or... |
|
| Author: | SteveSmith [ Sun Apr 22, 2018 1:05 pm ] |
| Post subject: | Re: Abranet standard or 'max' for drumsanders? |
I use Abranet for my ROS and I like it but I don't use it on my drum sander. You could call and ask them. |
|
| Author: | bcombs510 [ Sun Apr 22, 2018 1:42 pm ] |
| Post subject: | Re: Abranet standard or 'max' for drumsanders? |
I use this - Mirka 9A-570-120 Abranet 2-3/4" x 10yd Mesh Grip Roll https://www.amazon.com/dp/B004IQDL9Y?ref=yo_pop_ma_swf If you have never used Abranet on your drum sander there are some tricks to getting it to work and to keep it working. Let me know if you’d like details. Sent from my iPhone using Tapatalk |
|
| Author: | Mike OMelia [ Sun Apr 22, 2018 2:58 pm ] |
| Post subject: | Re: Abranet standard or 'max' for drumsanders? |
LOL, here we go again.
|
|
| Author: | Fasterthanlight [ Sun Apr 22, 2018 3:58 pm ] |
| Post subject: | Re: Abranet standard or 'max' for drumsanders? |
bcombs510 wrote: I use this - Mirka 9A-570-120 Abranet 2-3/4" x 10yd Mesh Grip Roll https://www.amazon.com/dp/B004IQDL9Y?ref=yo_pop_ma_swf If you have never used Abranet on your drum sander there are some tricks to getting it to work and to keep it working. Let me know if you’d like details. Sent from my iPhone using Tapatalk Would love to know the tricks... Thankyou. |
|
| Author: | bcombs510 [ Sun Apr 22, 2018 4:03 pm ] |
| Post subject: | Re: Abranet standard or 'max' for drumsanders? |
Mike OMelia wrote: LOL, here we go again. That’s why I will PM him.  Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|