| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Temp and Humidity for Bridge Location http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=50525 |
Page 1 of 1 |
| Author: | Spyder [ Mon Apr 16, 2018 9:11 pm ] |
| Post subject: | Temp and Humidity for Bridge Location |
OK, finally ready to locate the bridge on Build #1. Yeah! Wondered if I'd ever get to this stage. Got it figured out how to go about it, but the question is shop condition. With this crazy weather, I went out after lunch and it had cooled off to 60 degrees and 43% humidity. Tomorrow I can get the temp up to 70, but the humidity is tougher. Will do what I can, but 40-45 may be it for right now. So my big question is, how critical is this when locating the bridge? I went through the process of having a back bend the wrong way before I rehumidified it, so am familiar with how much it matters. Just wondering on laying out the bridge location. Any ideas? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|