Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 1:43 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 15 posts ] 
Author Message
PostPosted: Wed Mar 07, 2018 9:36 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
I mentioned i bought out a small hobby shop and got more than i paid for in tools.
In addition to those there were also a few Back and side sets.

These are supposedly more than 20 years old and he thought of the 6 sets that one was indian rosewood and the rest were brazilian.
He had told me he had 20 builds under his belt, so i am hoping he knew what he spoke of.

I'm thinking i got more like 3 qnd 3.

I'll have to start another thread on "restoring" these as a few of them had been taken down to around 3.3 mm and they all seem to have warped.

Without further ado, here's the pics and i'd be grateful for thoughts.

This first one he said was Indian rosewood and it looks like it to me. Some twisting on the sides and a little cupping on the back.
Attachment:
Set 1.jpg


The remaining sets are supposed to be Braz.

I think this one could be.
Attachment:
Set 2.jpg


and so could this one.
Attachment:
Set 3.jpg


I'm afraid this one looks more like Indian to me.
Certainly my flash dulled out the colors. What say you?
Attachment:
Set 4.jpg


This next one also looks Indian but it is marked with a "b"
I have never worked yet with either . so what do i know?
Attachment:
Set 5.jpg


And this one i am fairly sure is Braz.
It was packed like something from an Indiana Jones movie. Packed in a solid wooden case and screwed down.
Sides are perfect, back is a bit wonky.
Attachment:
Set 6.jpg


S i am of the mind 1 is definitely Indian, and likely 4 and 5 despite the "B". the rest could be Brazilian.

I don't really smell roses with any of them, but then again when i was working on my first guitar with a Madagascar rosewood fret board everyone was ranting about the smell of roses and i smelt nothing.

I won't be heart broken if you think they might not be.
If you think they might, it'll be years before i am ready to use them and hopefully i can stabilize them in the meantime?

Again, thanks for playing.

Rob


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 9:51 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
Lightly sand the wood and put your nose to it. Even the old thick veneer I use retains some smell when lightly sanded. To me Brazilian has a flowery fragrance, some smell chocolate - a sweet pleasant smell. Indian - not so much. Some have described it as smelling like an animal barn.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 10:04 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
Having just finished a nice glass of black russian, sniffing wood somehow sounded like a wonderful idea, especially since i Know what an animal barn smells like.

#1 and #4 definitely have a barn smell.
with #2, I was surprised to detect a definitive flowery smell. I was not expecting that.
# 6 had a faint sweet smell with no barn odor.
both #3 and #5 are somewhat in between.

Interesting.



These users thanked the author Robert Lak for the post: Dmaxwell (Thu Mar 08, 2018 12:48 am)
Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 10:29 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jan 22, 2010 9:59 pm
Posts: 3552
First name: Dennis
Last Name: Kincheloe
City: Kansas City
State: MO
Country: USA
Focus: Build
Status: Amateur
2,3,6 probably Brazilian, rest probably Indian.

3 is very nice. I'd join it the other way around.

Indian is easily differentiated from the other rosewoods by its small and numerous pores.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 10:34 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Thu Feb 09, 2006 2:35 pm
Posts: 2951
Location: United States
First name: Joe
Last Name: Beaver
City: Lake Forest
State: California
Focus: Build
The best bet to positively identify brazilian is to do the tests contained here.

http://www.wood-database.com/wood-artic ... rosewoods/

_________________
Joe Beaver
Maker of Sawdust


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 1:11 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
DennisK wrote:
2,3,6 probably Brazilian, rest probably Indian.

3 is very nice. I'd join it the other way around.

Indian is easily differentiated from the other rosewoods by its small and numerous pores.


+1 to scratch and sniff= it's nearly impossible to mistake the smell of BRW. I've had some sweet smelling Dalbergia species but none of the stuff I have ever put hands on is as pungent as BRW. If set #1 is BRW you probably got a pretty good deal. My money is on whatever high end BRW he had he was smart enough to sell for top dollar and it's EIR. A well quartered straight grained set of BRW like that would easily get $1K in return so it would be foolish to include a set like that as part of a bundle deal. Who knows though- if you're really lucky maybe he got kicked in the head as a kid or something! Kidding of course.

+1 to turning #3 the other way around (insides to the outsides so the sap wood is in the center), book match it too- one of the backs needs to be flipped front to back to match the sap wood up once it's been flipped sap to center. Looks like it could be a pretty decent set of BRW but hard to tell with pics alone.

- in terms of cupped sides- thin to .050"-0.60" and laminate with epoxy. There's a couple threads on building side laminating jigs if you don't have one already. Not only will it resolve the cupped sides but you'll end up with more rigid sides which should improve responsiveness and resist cracking as well- win/win/win.


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 6:13 am 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
Thanks all, sounds like we agree.

As far a #3 with the sapwood, that edge is curved and i don't think any of that will survive joining.

I am on guitars #2 and 3 and both are padauk. I laminated the sides for those and am quite happy with how they turned out. Definately a consideration for these.

I'll check the pores and maybe try the inflorescence test...


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 9:37 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4216
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
IMHO they are all IRW but I've been wrong before. Like Clay said sand them. You can tell very quickly. You don't need much. Just a light sanding.

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 10:27 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Robert Lak wrote:
Thanks all, sounds like we agree.

As far a #3 with the sapwood, that edge is curved and i don't think any of that will survive joining.

I am on guitars #2 and 3 and both are padauk. I laminated the sides for those and am quite happy with how they turned out. Definately a consideration for these.

I'll check the pores and maybe try the inflorescence test...


You can always add a backstrip between the plates if it gets too narrow after joining. Somagyi does it, I wouldn't hesitate to do it either.


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 10:52 am 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
Fingerstyle, all the plates except for number 6 are plenty wide, im just saying the sapwood would be gone.

Bobc... respect your opinion so i will try the inflouresence test. Only one set #2, was distinctivly floral.

Thsnks all...


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 11:06 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
Robert Lak wrote:
Fingerstyle, all the plates except for number 6 are plenty wide, im just saying the sapwood would be gone.

Bobc... respect your opinion so i will try the inflouresence test. Only one set #2, was distinctivly floral.

Thsnks all...


Right, but the way you have them oriented now it looks like the backs get more flatsawn to the inside where the joint would be as currently positioned . Ideally you want that to be facing the outer edges with the more well quartered edges facing in. Also one of the sides is facing upside down. You'll get a better grain match if you flip one side upside down and face the more quartered edges to the middle. Just my $.02


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 12:10 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
no 1 looks like shedua or ovangkol , Have lots of it


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 4:09 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Mon Dec 27, 2004 9:42 pm
Posts: 4216
Location: Buffalo, NY
First name: Robert
Last Name: Cefalu
City: Buffalo
State: NY
Zip/Postal Code: 14217
Country: US
After another good look I think set NO 6 could be Brazilian Sapwood set has one back upside down. Look at the sapwood. One is on top and the other on the bottom. Not book matched. I still think set 001 is IRW

_________________
Beautiful and unusual tone woods at a reasonable price.
http://www.rctonewoods.com/RCT_Store
The Zootman
1109 Military Rd.
Kenmore, NY 14217
(716) 874-1498


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 8:06 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
Of all those sets, I’d only like to build with #3 and #4. 4 looks like irw. 3 could be Braz,but could be another thing. I’d also join 3 the other way around,not because of sap but because there’s less flatsawn area that way and more of those nice ink lines.

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 11:38 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue Apr 12, 2011 2:05 pm
Posts: 227
First name: Lincoln
Last Name: Goertzen
City: Fort St John
State: BC
Country: Canada
Focus: Build
Status: Amateur
In addition to what's been mentioned here, I would ignore the "B" designation. I believe that's a grade, and has nothing to do with species.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 15 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 40 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com