Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 6:38 pm


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 10 posts ] 
Author Message
PostPosted: Wed Mar 07, 2018 6:27 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
Hi all... been absent for a while but plan to get more active.

I just bought the contents of a small hobby shop geared for guitars and have been doing an inventory - Yeah, i know, backwards - but i think i did OK.

So there's a few things that i have no idea what they might be, so i thought i'd post them here to see if anyone could ID.

This is the first... is it even related to to a guitar?
that black lever under that rubber "foot" forces that rubber foot in and out like it clamps to something.
The black lever at the base of the silver rod allows for adjustment of the rod.

Any ideas?
Thanks in advance!

Rob

Attachment:
mysterytool_1.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 6:47 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
and here's mystery tool #2

Some type of clamp... maybe for saddle and nut carving?

Attachment:
mysteryTool_2.jpg


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 6:59 pm 
Offline
Contributing Member
Contributing Member

Joined: Sat Sep 14, 2013 9:46 pm
Posts: 755
Location: Napa Valley
First name: David
Last Name: Foster
City: Napa
State: CA
Zip/Postal Code: 94558
Country: USA
Focus: Build
Status: Amateur
Whits looks like a binding trimmer/thickness trimmer maybe?

_________________
https://www.instagram.com/fostinoguitars/
https://www.facebook.com/PuraVidaUkuleles/


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 7:04 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
Yes the second one is for binding and is quite handy. THe first is just some sort of hold down.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 7:10 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
The second one I think is to attach plastic purfing to plastic binding with acetone...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 7:16 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Mar 06, 2010 4:15 pm
Posts: 1701
First name: Joey
Last Name: Holliday
City: Palmetto
State: Florida
Zip/Postal Code: 34221
Country: United States
Focus: Build
Status: Semi-pro
The top looks like a clamp that you would use by drilling a hole the size of the threaded bolt into you work bench, insert with a washer on top of the bench and underneath the bench, tighten the eye on the bolt and then it clamps downward to your bench instead of needing an oversized super deep clamp to accomplish the same thing. Useful for all kinds of things I would imagine.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 7:27 pm 
Offline
Cocobolo
Cocobolo

Joined: Sun Aug 25, 2013 9:34 am
Posts: 356
Location: Massachusetts
First name: Rob
Last Name: Lak
State: Massachusetts
Country: USA
Focus: Build
Status: Amateur
Fingerstyle.... that sounds likely! The loop on the end had me scratching my head, but maybe he lost the nut. Gonna search on that... Thnx!

Found it on Amazon... https://www.amazon.com/Quick-Drill-Pres ... B0033AYY2O


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 9:16 pm 
Offline
Contributing Member
Contributing Member

Joined: Tue Dec 17, 2013 10:52 pm
Posts: 2953
First name: Don
Last Name: Parker
City: Charleston
State: West Virginia
Zip/Postal Code: 25314
Country: USA
Focus: Build
Status: Amateur
That first one does what Joey said, but I’m pretty sure it is designed for a drill press table as a work hold down.


Top
 Profile  
 
PostPosted: Wed Mar 07, 2018 9:22 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Tue Mar 01, 2011 1:32 pm
Posts: 3470
First name: Alex
Last Name: Kleon
City: Whitby
State: Ontario
Zip/Postal Code: L1N8X2
Country: Canada
Focus: Build
Status: Amateur
doncaparker wrote:
That first one does what Joey said, but I’m pretty sure it is designed for a drill press table as a work hold down.


Yup. Cam clamp for a drill press. You can use it like a bench dog clamp, as well.

Alex

_________________
"Indecision is the key to flexibility" .... Bumper sticker


Top
 Profile  
 
PostPosted: Thu Mar 08, 2018 4:27 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Binding Laminator...

http://www.stewmac.com/Luthier_Tools/To ... nator.html

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 10 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: TripodBob and 43 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com