Official Luthiers Forum!

Owned and operated by Lance Kragenbrink
It is currently Thu Mar 28, 2024 5:00 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 25 posts ] 
Author Message
PostPosted: Tue Jan 16, 2018 2:13 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue May 15, 2012 7:34 am
Posts: 131
First name: David
Last Name: Ingalls
City: Ashland
State: OR
Zip/Postal Code: 97520
Country: USA
Focus: Build
Status: Semi-pro
If you use spokeshave to shape necks, do you have a favorite make and model and/or a recommendation for particular features and configuration?


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 2:26 pm 
Offline
Koa
Koa

Joined: Fri Feb 24, 2017 8:43 am
Posts: 1700
I have the Veritas flat bottom. Now it’s the only one I own:) but I have no complaints


Sent from my iPhone using Tapatalk Pro


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 2:30 pm 
Offline
Koa
Koa

Joined: Sun Apr 25, 2010 4:46 pm
Posts: 501
First name: Mark
Last Name: McLean
City: Sydney
State: New South Wales
Zip/Postal Code: 2145
Country: Australia
Focus: Build
Status: Amateur
I have the Veritas flat sole one, and love it. The thumbwheel blade adjustment is very precise, and it is just the right size and weight. I also use various rasps and microplanes.


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 3:20 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5397
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
I have the Quangsheng bronze one. Bought it for carving necks.
Bit like a LN Bloggs one but half the price.
Adjustment is by tapping with a small brass hammer, like a wooden plane, and I use them as well, from 1 1/2" miniatures to try planes.
It's maybe not for everyone, but I just love it.
Attachment:
quangsheng-bronze-spokeshave-cherry.jpg


You do not have the required permissions to view the files attached to this post.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 3:32 pm 
Offline
Cocobolo
Cocobolo
User avatar

Joined: Tue Mar 25, 2014 4:36 pm
Posts: 159
First name: Ed
Last Name: Miller
City: Wood Dale
State: Illinois
Country: USA
Focus: Build
Status: Amateur
Looks nice. eBay???


Sent from my iPhone using Tapatalk


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 3:41 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Mon Aug 23, 2010 11:42 pm
Posts: 1701
First name: John
Last Name: Parchem
City: Seattle
State: Wa
Zip/Postal Code: 98177
Country: USA
Focus: Build
Status: Amateur
I use the LN Boggs flat sole and love it. I do not really adjust so much as lay the sole on a flat and loosen and then tighten the blade holder.

_________________
http://www.Harvestmoonguitars.com


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 3:43 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5397
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
edstrummer wrote:
Looks nice. eBay???

Sent from my iPhone using Tapatalk

I bought in UK from https://www.workshopheaven.com/quangsheng-bronze-spokeshave.html
Afraid you're on your own your side of the pond.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 4:40 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
I have these and they have worked well for me. They were discussed a few years ago on the OLF and got good comments, so I tried them. Haven't felt the need to get something else. ...maybe at some point. Unfortunately, they are no longer available.

http://www.leevalley.com/us/wood/page.a ... 6321&cat=1

I think Japan Woodworker sells something similar...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 5:19 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jul 19, 2008 11:07 am
Posts: 802
Location: Cobourg ON
First name: Steve
Last Name: Denvir
City: Baltimore
State: ON
Zip/Postal Code: K0K 1C0
Country: Canada
Focus: Build
Status: Amateur
Dave’s Shaves. Windsor chair makers, who live and die by their spokeshaves, swear by them.

Get the small compass shave with the brassed front. Perfect for getting into the curve of the heel.

Not inexpensive, but worth every penny.


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 7:51 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
I have 13 spokeshaves currently ,for very fast stock removal I use a large chinese spokeshave that looks like an upside down drawknife , sharpened and honed it is extremely adept for fast stock removal.The chinese ebony or rosewood smaller shaves are also very good. These shaves can be bought on e bay


Top
 Profile  
 
PostPosted: Tue Jan 16, 2018 10:41 pm 
Offline
Cocobolo
Cocobolo

Joined: Tue May 15, 2012 7:34 am
Posts: 131
First name: David
Last Name: Ingalls
City: Ashland
State: OR
Zip/Postal Code: 97520
Country: USA
Focus: Build
Status: Semi-pro
Thanks, everyone, for the good tips!


Top
 Profile  
 
PostPosted: Wed Jan 17, 2018 8:46 am 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Thu Jan 06, 2011 6:08 pm
Posts: 2712
First name: ernest
Last Name: kleinman
City: lee's summit
State: mo
Zip/Postal Code: 64081
Country: usa
Focus: Build
Status: Professional
David forgot , the wooden shaves were $5 for the larger one and abou t18$ for the small ebony one . they look hand forged, but will need some honing. Another excellent tool is from woodcraft it is a low angle metal spokeshave by wood river on sale for $50 more or less . This spokeshave is also a great buy it/s flat , has a vy sharp blade and cuts cleanly. The 3 L/N shaves are great but a lot of $$$. Hope this helps. You can also modify e vil bay , yard sale, and used , stanleys and KUNZ


Top
 Profile  
 
PostPosted: Wed Jan 17, 2018 11:11 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Tue May 13, 2008 10:44 am
Posts: 6232
Location: Virginia
I've been using the same Kunz #51 flat bottom spoke shave for 25 years. Cheap and effective. At some point I got a Veritas spoke shave thinking I would upgrade but immediately went back to the Kunz because the base is more narrow and as such lets me get closer to the heal and the peghead.


Top
 Profile  
 
PostPosted: Wed Jan 17, 2018 3:55 pm 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 951
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
On Ebay are some inexpensive spokeshaves sold out of Hong Kong, iron located by a wooden wedge. Do these work, or can they be persuaded to work? It's easy to get a really nice spokeshave, bring money. But what limitations do inexpensive ones have besides offering nothing to one's trophy-tool cabinet?

Thanks!

_________________
Peter Havriluk


Top
 Profile  
 
PostPosted: Wed Jan 17, 2018 9:46 pm 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
The two different kinds are the Stanley 151 and clones, which are like planes with an angled blade and short bed, and the wooden style ones with a blade that rides flat on the work. I have made a half dozen of the wooden ones - simple to do - with blades from either:

http://www.ncworkshops.com/parts_service.html

or

http://www.hocktools.com/products/kits.html

I find them very easy to use, and a round bottomed one works great on concave curves that are pretty tight. Older ones that are adjusted by tapping the blade are a little finicky. The modern version of this tool has threaded tangs on the blade and large thumbscrews to make it easy to remove for honing. I adjust the blade so it cuts deeper on the left side than on the right so you can do course and finer work without switching tools. Here is a purpleheart one I made with a Hock blade, with a boxwood one in the background that a friend made for me with a Dave's Shave blade. The neck is Ash:


You do not have the required permissions to view the files attached to this post.


Top
 Profile  
 
PostPosted: Wed Jan 17, 2018 10:08 pm 
Offline
Koa
Koa

Joined: Mon Feb 13, 2012 8:49 pm
Posts: 951
First name: peter
Last Name: havriluk
City: granby
State: ct
Zip/Postal Code: 06035
Country: usa
Focus: Build
Status: Amateur
Thanks for the pictures and links. Nice stuff but way off my budget.

_________________
Peter Havriluk


Top
 Profile  
 
PostPosted: Thu Jan 18, 2018 4:05 pm 
Offline
Koa
Koa

Joined: Thu Sep 10, 2009 4:01 pm
Posts: 1887
Location: UK
sdsollod wrote:
I have these and they have worked well for me. They were discussed a few years ago on the OLF and got good comments, so I tried them. Haven't felt the need to get something else. ...maybe at some point. Unfortunately, they are no longer available.

http://www.leevalley.com/us/wood/page.a ... 6321&cat=1

I think Japan Woodworker sells something similar...


Simple but really good, just need to get the blade extremely sharp. I have both sizes. Can't remember where I bought mine but it may have been direct from China or Taiwan via the auction site. As with all wooden shaves with the tang you can adjust the blade so that it cuts fine at one end of the blade and deeper at the other. It's been years since I used my metal shaves.


Top
 Profile  
 
PostPosted: Thu Jan 18, 2018 4:50 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
Here is the "contour" plane in action. The blade definitetly takes some work, but once you get it sharp it works well. Japan Woodworker has something similar. As with anything you can spend as much as you want, but often simple inexpensive things can work fine.
https://www.japanwoodworker.com/product ... spokeshave


You do not have the required permissions to view the files attached to this post.

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Thu Jan 18, 2018 4:53 pm 
Offline
Koa
Koa
User avatar

Joined: Thu Jan 10, 2008 5:08 am
Posts: 1905
Location: Raleigh, NC
First name: Steve
Last Name: Sollod
Focus: Build
Status: Amateur
BTW - I like both sizes, but I really like the smaller one. It works well around the heel...

_________________
Steve Sollod (pronounced sorta like "Solid")
www.swiftcreekguitars.com


Top
 Profile  
 
PostPosted: Thu Jan 18, 2018 8:24 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
i only have one spokeshave, a cheap kunz (number 64?) and it serves me well, but i lust over the small HNT gordon one: https://www.hntgordon.com.au/gidgee-spo ... blade.html

one day...

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
PostPosted: Fri Jan 19, 2018 5:25 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 5397
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
mqbernardo wrote:
i only have one spokeshave, a cheap kunz (number 64?) and it serves me well, but i lust over the small HNT gordon one: https://www.hntgordon.com.au/gidgee-spo ... blade.html

one day...

That. Is. G e o r g e o u s.

_________________
The name catgut is confusing. There are two explanations for the mix up.

Catgut is an abbreviation of the word cattle gut. Gut strings are made from sheep or goat intestines, in the past even from horse, mule or donkey intestines.

Otherwise it could be from the word kitgut or kitstring. Kit meant fiddle, not kitten.


Top
 Profile  
 
PostPosted: Fri Jan 19, 2018 8:46 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Dec 17, 2010 6:22 pm
Posts: 1295
First name: Miguel
Last Name: Bernardo
Country: portugal
Focus: Build
Status: Semi-pro
I hear ya. Sometimes they sell discounted ones at eBay, with very slight blemishes. Worth looking for.

_________________
member of the guild of professional dilettantes


Top
 Profile  
 
PostPosted: Fri Jan 19, 2018 11:33 am 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 5924
I paid a dollar for the last spokeshave I bought. It was a Stanley 51 flea market find. That is about what they go for there. I also have a Record similar to the Stanley 151. Spokeshaves are simple tools, many people made their own.The metal Stanley's were once the "fancy" ones.
I also have a cobbler's sole shave I found at the flea market - similar to this one :
http://www.ebay.com/itm/Snell-Atherton- ... SwhQhYyZv3

It's kind of cute. So if anyone needs their soul shaved let me know laughing6-hehe .


Top
 Profile  
 
PostPosted: Tue Jan 23, 2018 7:10 pm 
Offline
Cocobolo
Cocobolo

Joined: Thu Jan 11, 2018 9:19 am
Posts: 297
Location: St. Charles MO
First name: Karl
Last Name: B
State: MO
Zip/Postal Code: 63303
Country: United States
Focus: Build
Status: Amateur
Kunz NO, Stanley made in England YES.

Karl

_________________
Measure Twice,

Karl B.


Top
 Profile  
 
PostPosted: Sun May 13, 2018 6:26 am 
Offline
Contributing Member
Contributing Member

Joined: Sun Feb 17, 2013 4:58 pm
Posts: 1449
First name: Ed
Last Name: Minch
City: Chestertown
State: MD
Zip/Postal Code: 21620
Country: United States
Focus: Build
Status: Amateur
At least this *edited* is bringing some interesting threads out of the woodwork.


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 25 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: No registered users and 51 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com