Official Luthiers Forum!

Solely owned and operated by Lance Kragenbrink
It is currently Tue Oct 16, 2018 11:09 am


All times are UTC - 5 hours


Forum rules


Be nice, no cussin and enjoy!




Post new topic Reply to topic  [ 9 posts ] 
Author Message
PostPosted: Thu Nov 16, 2017 12:05 pm 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Sat Jan 31, 2009 8:50 pm
Posts: 1516
Location: Seattle WA
Focus: Build
Status: Semi-pro
Stainless and spring. I have only used .015" SS and wondered if thicker would give more support?


Top
 Profile  
 
PostPosted: Thu Nov 16, 2017 12:07 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Mon Jan 28, 2008 5:21 am
Posts: 3834
Location: Central PA
First name: john
Last Name: hall
City: Hegins
State: pa
Zip/Postal Code: 17938
Country: usa
Focus: Build
Status: Professional
much depends on the temper . Many buy the shim stock that is non tempered and will bend I use the tempered stainless.
.015 is plenty for support .

_________________
John Hall
blues creek guitars
Authorized CF Martin Repair
Member Board of Directors ASIA
You Don't know what you don't know until you know it



These users thanked the author bluescreek for the post: Pmaj7 (Thu Nov 16, 2017 12:08 pm)
Top
 Profile  
 
PostPosted: Thu Nov 16, 2017 1:09 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 2628
Location: Alexandria MN
I've been using blue tempered shim stock at 0.010 with no problem for a long time. Wrapped in foil plus the brown wrapping paper.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.



These users thanked the author Terence Kennedy for the post: Pmaj7 (Thu Nov 16, 2017 2:10 pm)
Top
 Profile  
 
PostPosted: Sun Nov 19, 2017 2:15 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6202
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
bluescreek wrote:
much depends on the temper . Many buy the shim stock that is non tempered and will bend I use the tempered stainless.
.015 is plenty for support .


I got mine from John, perfectly sized for the fox bender. If what I have is what he is selling now, they do bend some, easily reshaped, but not that true blue spring steel. I've always been a bit wary of that stuff. What I use now will pop if tape comes undone (after bending), but not bad as to worry me. I have never had a support issue with these.


Top
 Profile  
 
PostPosted: Sun Nov 19, 2017 2:16 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood
User avatar

Joined: Wed Feb 20, 2008 9:12 pm
Posts: 6202
First name: Mike
Last Name: O'Melia
City: Huntsville
State: Alabama
Focus: Build
Status: Semi-pro
Terence Kennedy wrote:
I've been using blue tempered shim stock at 0.010 with no problem for a long time. Wrapped in foil plus the brown wrapping paper.


What do you use the foil for?


Top
 Profile  
 
PostPosted: Sun Nov 19, 2017 3:16 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Fri Dec 14, 2007 3:21 pm
Posts: 2628
Location: Alexandria MN
To make sure the slats don’t discolor the wood. Might not be necessary with the paper but i’ve been doing it so long I just keep doing it. I just wrap it around the slat and secure with binding tape. The same foil has been on my slats quite a while.

_________________
It's not what you don't know that hurts you, it's what you do know that's wrong.


Top
 Profile  
 
PostPosted: Sun Nov 19, 2017 7:01 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Sun Mar 30, 2008 8:20 am
Posts: 2727
I use strips of Formica for slats. They do eventually take a "set" but they are semi disposable. I don't use paper or foil and keep the blanket to the inside of the work piece so any minor scorching that might occur is on the inside.


Top
 Profile  
 
PostPosted: Sun Nov 19, 2017 7:19 pm 
Offline
Brazilian Rosewood
Brazilian Rosewood

Joined: Wed Apr 08, 2009 9:34 am
Posts: 2965
I just bought John Hall's whole setup. It works, the thermostat is reliable and just made my own bending forms.
Looking back on it all, I probably should have ordered a third slat, but it worked very well, Only problems I had were of my own making.

_________________
J. Brentrup Guitars & Mandolins
http://www.brentrup.com


Top
 Profile  
 
PostPosted: Sun May 13, 2018 7:29 am 
Offline
Contributing Member
Contributing Member
User avatar

Joined: Fri Jul 10, 2009 4:44 am
Posts: 3440
First name: colin
Last Name: north
Country: Scotland.
Focus: Build
Status: Semi-pro
This "Frank Barraza" bot or whatver is a bit of a pain in the proverbial @/.'*.

_________________
“There are two men inside the artist, the poet and the craftsman. One is born a poet. One becomes a craftsman.” - Emile Zola


Top
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 9 posts ] 

All times are UTC - 5 hours


Who is online

Users browsing this forum: UncleMikey and 17 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:  
Powered by phpBB® Forum Software © phpBB Group
phpBB customization services by 2by2host.com