Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Birko
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49953
Page 1 of 1

Author:  Chris Ensor [ Wed Nov 15, 2017 12:08 pm ]
Post subject:  Birko

Anyone hear from Andy Birko lately? I'm needing to get in touch with him.

Author:  bcombs510 [ Wed Nov 15, 2017 12:57 pm ]
Post subject:  Re: Birko

I was chatting with him via email this morning.

Author:  Chris Ensor [ Wed Nov 15, 2017 3:20 pm ]
Post subject:  Re: Birko

Would you mind forwarding me his email address?

Author:  bcombs510 [ Wed Nov 15, 2017 3:30 pm ]
Post subject:  Re: Birko

PM sent


Sent from my iPhone using Tapatalk

Author:  Hesh [ Wed Nov 15, 2017 3:42 pm ]
Post subject:  Re: Birko

He was at our place a week or so ago.

Author:  meddlingfool [ Wed Nov 15, 2017 4:19 pm ]
Post subject:  Re: Birko

Not 100% related, but Alaska Specialty Woods posted this on FB and my first thought was Andy...

Question! And help wanted! Is there someone here that is knowledgeable and well versed with the use and operation of CNC . We have a project in mind and seek consultation about do-ability and equipment needed if do-able.

Author:  rlrhett [ Wed Nov 15, 2017 8:08 pm ]
Post subject:  Re: Birko

I occasionally teach CNC to woodworkers at the local community college. But I have to admit, try as I might I have never gotten the results Andy does carving necks. I would give anything to see his workflow on that. Still, happy to give a helping hand to a fellow luthier if I can.

EDIT: Sorry, that is not you asking. You are repeating a request from Alaska Specialty Woods. Never mind...

Author:  Andy Birko [ Fri Nov 17, 2017 11:35 am ]
Post subject:  Re: Birko

Thanks everyone - we're in touch!

Author:  dzsmith [ Fri Nov 17, 2017 5:40 pm ]
Post subject:  Re: Birko

Hi Andy!
I Keep plugging your name on the electric forums.
Regards,
Dan

Author:  Mike OMelia [ Sun Nov 19, 2017 2:18 pm ]
Post subject:  Re: Birko

Yeesh! Please don't title a post with a person's name and nothing else... scared me. Don't even ask me what I was thinking. LOL!

Andy, I need to order up some headstock plate engraving.

Author:  J De Rocher [ Sun Nov 19, 2017 3:37 pm ]
Post subject:  Re: Birko

Mike O'Melia wrote:
Yeesh! Please don't title a post with a person's name and nothing else... scared me. Don't even ask me what I was thinking. LOL!

Andy, I need to order up some headstock plate engraving.


Yea, it's like when you turn on the radio in the car and then hear three songs in a row from a band or singer that's not in the station's regular rotation.

Author:  Clay S. [ Sun Nov 19, 2017 7:19 pm ]
Post subject:  Re: Birko

Morbid much?

Author:  JSDenvir [ Sun Nov 19, 2017 9:37 pm ]
Post subject:  Re: Birko

Clay S. wrote:
Morbid much?

Yep.

Author:  Alex Kleon [ Mon Nov 20, 2017 6:44 pm ]
Post subject:  Re: Birko

JSDenvir wrote:
Clay S. wrote:
Morbid much?

Yep.


Happens when your age exceeds the speed limit! gaah

Alex

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/