Official Luthiers Forum!
http://www.luthiersforum.com/forum/

How do you hold your....
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49933
Page 1 of 1

Author:  SnowManSnow [ Fri Nov 10, 2017 5:42 pm ]
Post subject:  How do you hold your....

Necks white you carve them?
Nothing like stuff moving around while you try and work!
Gahhhhh
Clamp? Locator pins in the truss rod slit to keep it from going side to side ?
Sorry for so many posts lately.
Just venturing into territory I haven’t before


Sent from my iPhone using Tapatalk Pro

Author:  Ken Lewis [ Fri Nov 10, 2017 6:32 pm ]
Post subject:  Re: How do you hold your....

A google search turns up a whole bunch of options. Here's a holding fixture from a random website, fourth or fifth picture down.
It's similar to mine and what many use to hold the neck while carving.
Ken

http://edge.cs.drexel.edu/GICL/people/s ... rving.html

Author:  Ken Lewis [ Fri Nov 10, 2017 6:37 pm ]
Post subject:  Re: How do you hold your....

Lots of good guitar building info on that website btw.

Author:  Clay S. [ Fri Nov 10, 2017 7:25 pm ]
Post subject:  Re: How do you hold your....

I screw them to a jig to rough them out with a router, and then use f body clamps to clamp them to the bench. It usually takes two clamps to secure them enough to keep them from moving. I'm sure there are better methods.

Author:  bcombs510 [ Fri Nov 10, 2017 7:34 pm ]
Post subject:  Re: How do you hold your....

The few necks that I have carved I used something like what Ken posted. It doesn’t have to be super fancy, just enough to let you hit all the angles.


Sent from my iPhone using Tapatalk

Author:  James Orr [ Fri Nov 10, 2017 8:55 pm ]
Post subject:  Re: How do you hold your....

Less ideal than having a dedicated carving fixture, but I just clamped my last one in my Stew Mac vise around the 12th fret and went to work. It worked fine.

Author:  Pmaj7 [ Sat Nov 11, 2017 1:03 am ]
Post subject:  Re: How do you hold your....

Mostly use the stewmac vice for everything. Then, like many, I glue the fretboard on and carve the neck shaft on the edge of a 2x12 or similar clamped in the vice. One clamp holding the fretboard extension down and another holding the head down on a wedge screwed to the 2x12.

Author:  Colin North [ Sat Nov 11, 2017 4:45 am ]
Post subject:  Re: How do you hold your....

http://www.luthiersforum.com/forum/viewtopic.php?f=10117&t=26349

Author:  doncaparker [ Sat Nov 11, 2017 8:59 am ]
Post subject:  Re: How do you hold your....

After reading Safety Reminder #1472, my answer is "very carefully."

I use the same 2x12 thing most folks here seem to be using. You cut off a bit at the end, at a 15 degree angle, then glue the small cutoff piece onto the other side of the 2x12, creating a 15 degree incline. Drill some large holes for clamp heads at the headstock end and the fret extension end. Cut a notch where the nut would go, to deal with the transition from fingerboard to headstock. Clamp the whole shebang in something sturdy, but capable of being repositioned. It works very well.

Author:  RustySP [ Sat Nov 11, 2017 11:32 am ]
Post subject:  Re: How do you hold your....

If I’m just profiling the back of the neck I screw a padded backstop to the bench and push and pull my spokeshave. I do all my neck carving with the neck bolted to the body.Image


Sent from my iPhone using Tapatalk

Author:  SnowManSnow [ Sat Nov 11, 2017 11:52 am ]
Post subject:  Re: How do you hold your....

I’ve seen several references to that stew mac vise.
Seems expensive...
Is it that good ?


Sent from my iPhone using Tapatalk Pro

Author:  Pmaj7 [ Sat Nov 11, 2017 12:01 pm ]
Post subject:  Re: How do you hold your....

Yes. Although the price has gone up 60% in 10 years, but I guess it still worth it for how much it gets used. Woodcraft has a similar one a little cheaper.

Author:  George L [ Sat Nov 11, 2017 12:31 pm ]
Post subject:  Re: How do you hold your....

doncaparker wrote:
After reading Safety Reminder #1472, my answer is "very carefully."

I use the same 2x12 thing most folks here seem to be using. You cut off a bit at the end, at a 15 degree angle, then glue the small cutoff piece onto the other side of the 2x12, creating a 15 degree incline. Drill some large holes for clamp heads at the headstock end and the fret extension end. Cut a notch where the nut would go, to deal with the transition from fingerboard to headstock. Clamp the whole shebang in something sturdy, but capable of being repositioned. It works very well.


Yup. I have the same kind of setup. Like any jig, it only works if you actually use it. Wish I hadn't left it on the shelf the other day. [headinwall]

Author:  Michaeldc [ Sat Nov 11, 2017 12:42 pm ]
Post subject:  Re: How do you hold your....

Here's what I'm doing.

The neck in the fixture is for my 27" scale baritone and it just fits....

Author:  rlrhett [ Sat Nov 11, 2017 1:33 pm ]
Post subject:  Re: How do you hold your....

@Michaeldc that is the nicest version of that jig I've seen. Super clean and elegant.

Author:  Theo [ Sat Nov 11, 2017 2:29 pm ]
Post subject:  Re: How do you hold your....

Attachment:
IMG_1334.JPG
Attachment:
IMG_1335.JPG
Attachment:
IMG_1336.JPG
Attachment:
IMG_1337.JPG


Here's my version, it works pretty well but is not nearly as rigid as it should be, in that respect the 2x12 version is probably far superior. I'm only a hobby builder so I don't have a standard length, so I went with something pretty adjustable. I use both barrel nuts and hanger bolts depending on the instrument, both work with the mounting end of this, it will also take the neck with or without fretboard.

For the heel I usually just clamp the neck flat to my bench, or upright in my bench vise

I really like the look of michaeldc's jig, that looks awesome


Sent from my iPad using Tapatalk

Author:  Dave m2 [ Sat Nov 11, 2017 3:43 pm ]
Post subject:  Re: How do you hold your....

This follows several other posters but there are two points: I am quite tall with a back problem, so raising the vice above normal bench level is useful, both for this and other tasks, and secondly it being a swivel vice it enables me to attack the work in the best direction and to get the light right for seeing where the curves have got to. I do the initial heavier carving with the neck clamped to the bench. This arrangement is better for the refining with spokeshaves and skew chisels. (This neck is not ready for carving but is there just to illustrate the technique.)

Author:  TimAllen [ Mon Nov 13, 2017 4:34 pm ]
Post subject:  Re: How do you hold your....

Mine is a rough and ready version of they typical fixture shown, with a couple of variations.

Since I do most of the shaping before the fretboard is on, I've screwed a truss-rod size strip of wood in the center where it fits into the truss rod slot, which makes it easier to clamp the neck securely. (This is not an original idea.) For any sanding or touch-up shaping after the fingerboard is on, I remove the strip and tape some thin cork strips to run up each side of the fixture, holding the radiused fretboard securely.

I'm another person with a tendency to back problems, and I've had painful back spasms caused by leaning over the bench. My fixture is made of a 2X 6, and it is attached to a kind of base, which is just another piece of 2 X 6 at an angle, with a kind of bracket to make an "L." The base screws to the front and side of one of the legs of my assembly table (wing nuts on to hanger bolts) so that the whole neck is held at a convenient angle above the bench. I can stand or sit at a high stool. I think I've seen something similar at the Martin factory. This arrangement helps prevent back issues, and I also find it's easier to control rasps and chisels when I'm standing up straight. I learned that I could play the guitar better if I didn't huddle over the guitar, and it's the same with tool use.

Author:  sdsollod [ Mon Nov 13, 2017 4:59 pm ]
Post subject:  Re: How do you hold your....

Nothing fancy, but functional...

Author:  James Orr [ Mon Nov 13, 2017 5:27 pm ]
Post subject:  Re: How do you hold your....

SnowManSnow wrote:
I’ve seen several references to that stew mac vise.
Seems expensive...
Is it that good ?


Sent from my iPhone using Tapatalk Pro


It’s fantastic, Brandon. It’s the kind of thing where you forget how much you had to pony up for he second you handle it. The accessory nut making vise is equally awesome.


Sent from my iPhone using Tapatalk

Author:  Terence Kennedy [ Mon Nov 13, 2017 5:33 pm ]
Post subject:  Re: How do you hold your....

Image

Author:  SnowManSnow [ Mon Nov 13, 2017 7:25 pm ]
Post subject:  Re: How do you hold your....

James Orr wrote:
SnowManSnow wrote:
I’ve seen several references to that stew mac vise.
Seems expensive...
Is it that good ?


Sent from my iPhone using Tapatalk Pro


It’s fantastic, Brandon. It’s the kind of thing where you forget how much you had to pony up for he second you handle it. The accessory nut making vise is equally awesome.


Sent from my iPhone using Tapatalk

Thanks James I’ll be looking into it


Sent from my iPhone using Tapatalk Pro

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/