| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Goodall guitars shop video http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49919 |
Page 1 of 1 |
| Author: | nkforster [ Wed Nov 08, 2017 4:32 am ] |
| Post subject: | Goodall guitars shop video |
Very good video for Goodall guitars - every time I see one of these videos I learn something new. Fascinating approach. For some reason I can't get the forum Youtube tags to work. If any of you can, please do! https://www.youtube.com/watch?v=gS78naD ... e=youtu.be |
|
| Author: | Pmaj7 [ Wed Nov 08, 2017 12:00 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Thanks Nigel, I love these too! |
|
| Author: | arie [ Wed Nov 08, 2017 12:06 pm ] |
| Post subject: | Re: Goodall guitars shop video |
nice video. interesting take-a-ways: -tenon-less neck joint. what about shift or finish burrowing? -perimeter thinning of the top -closed box voicing. |
|
| Author: | John Lewis [ Wed Nov 08, 2017 12:17 pm ] |
| Post subject: | Re: Goodall guitars shop video |
This and the video on Michael Greenfield are both excellent! |
|
| Author: | Terence Kennedy [ Wed Nov 08, 2017 12:21 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Thanks. It is amazing how we all gravitate to similar techniques for some things and unique for others. You always learn something from a shop tour. Goodalls are great guitars. I actually made some very positive changes in my instruments based on examining a Goodall that was owned by a great MN player. |
|
| Author: | LarryH [ Wed Nov 08, 2017 12:37 pm ] |
| Post subject: | Re: Goodall guitars shop video |
arie wrote: nice video. interesting take-a-ways: -tenon-less neck joint. what about shift or finish burrowing? -perimeter thinning of the top -closed box voicing. Haven't posted here in a long time and am expanding/cleaning/reorganizing my shop with the hopes of building again and found this video to be very inspiring. Noticed those 2 things as well Arie. Also noticed what seemed like pretty thick tops to start the voicing process?? Could be wrong about that. Again very nice video, thanks for posting that!! |
|
| Author: | arie [ Wed Nov 08, 2017 2:11 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Terence Kennedy wrote: Thanks. It is amazing how we all gravitate to similar techniques for some things and unique for others. You always learn something from a shop tour. Goodalls are great guitars. I actually made some very positive changes in my instruments based on examining a Goodall that was owned by a great MN player. i've had the chance to play and examine about 6~7 or so Goodalls and have also absorbed a fair amount into my stuff as well. specifically on the back plate. |
|
| Author: | Brad Goodman [ Wed Nov 08, 2017 6:23 pm ] |
| Post subject: | Goodall guitars shop video |
Great video! Interesting the way he uses a router jig to shape the braces after they're glued to the top. Also the way they feather the end of the braces with that special machine. Sent from my iPhone using Tapatalk |
|
| Author: | Tim Mullin [ Thu Nov 09, 2017 12:05 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Note the use of CA glue to “harden” the spruce top before cutting the channels for the rosette — an idea I’ve thought of but never tried, for fear of the dreaded CA yellow stain. Wonder what brand/formula they use? Sent from my iPad using Tapatalk |
|
| Author: | Pmaj7 [ Thu Nov 09, 2017 12:15 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Tim Mullin wrote: Note the use of CA glue to “harden” the spruce top before cutting the channels for the rosette — an idea I’ve thought of but never tried, for fear of the dreaded CA yellow stain. Wonder what brand/formula they use? Yeah, I might give that a go too. I think as long as it doesn't hit the end-grain it would be okay. Or maybe they're using medium, thick, or gel?
Sent from my iPad using Tapatalk |
|
| Author: | LarryH [ Thu Nov 09, 2017 12:55 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Tim Mullin wrote: Note the use of CA glue to “harden” the spruce top before cutting the channels for the rosette — an idea I’ve thought of but never tried, for fear of the dreaded CA yellow stain. Wonder what brand/formula they use? Sent from my iPad using Tapatalk Also thought that was considered a no-no. Would Shellac serve the same purpose? |
|
| Author: | ernie [ Thu Nov 09, 2017 8:54 pm ] |
| Post subject: | Re: Goodall guitars shop video |
I/ve used thin super glue. but prefer 2 coats of vy thin shellac, especially on WRC |
|
| Author: | meddlingfool [ Thu Nov 09, 2017 9:00 pm ] |
| Post subject: | Re: Goodall guitars shop video |
The dreaded yellow stain comes from CA wicking into the endgrain of an unsealed rosette channel. It sands off fine from above once it's dry. |
|
| Author: | Trevor Gore [ Fri Nov 10, 2017 1:48 am ] |
| Post subject: | Re: Goodall guitars shop video |
Staining must be brand dependent (or in conjunction with particular pieces of wood). I've had CA stain flat grain spruce and also stain maple purfling yellow, to where I didn't want to sand any further. Test, test, test or just avoid using it, which is what I decided to do. |
|
| Author: | meddlingfool [ Fri Nov 10, 2017 2:54 am ] |
| Post subject: | Re: Goodall guitars shop video |
Hmm, that's interesting. I've never met a CA that couldn't be sanded off the top of it didn't wick into endgrain, so maybe being picky about your brand of CA has payoff... |
|
| Author: | meddlingfool [ Fri Nov 10, 2017 5:02 am ] |
| Post subject: | Re: Goodall guitars shop video |
There was much talk about the importance of the finish without mention of what the finish was. Inquiring Minds Must Know |
|
| Author: | ernie [ Fri Nov 10, 2017 7:45 am ] |
| Post subject: | Re: Goodall guitars shop video |
cross linked urethane varnish just guessing ?? |
|
| Author: | Terence Kennedy [ Fri Nov 10, 2017 9:02 am ] |
| Post subject: | Re: Goodall guitars shop video |
As I recall he said catalyzed urethane in the video. Count me as a fan as well, especially as applied by Tony Ferguson. |
|
| Author: | nkforster [ Fri Nov 10, 2017 2:51 pm ] |
| Post subject: | Re: Goodall guitars shop video |
meddlingfool wrote: Hmm, that's interesting. I've never met a CA that couldn't be sanded off the top of it didn't wick into endgrain, so maybe being picky about your brand of CA has payoff... A few years back I sealed up the binding on ten scraped instruments with superglue, to find the stains the next day. No endgrain was exposed. Couldn't sand it out. There was a lot of sunbursts that year... |
|
| Author: | mountain whimsy [ Fri Nov 10, 2017 3:28 pm ] |
| Post subject: | Re: Goodall guitars shop video |
An amazing collection of tools and special jigs. That resaw bandsaw was particularly impressive! |
|
| Author: | meddlingfool [ Fri Nov 10, 2017 3:39 pm ] |
| Post subject: | Re: Goodall guitars shop video |
I guess I've just been lucky all these years... |
|
| Author: | Trevor Gore [ Fri Nov 10, 2017 6:09 pm ] |
| Post subject: | Re: Goodall guitars shop video |
...or very sensibly chose a good CA! What are you using Ed? |
|
| Author: | meddlingfool [ Fri Nov 10, 2017 6:27 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Well, it's not sensibility I'll tell you that, but luck of the draw. At Larrivee we used Jet so that's what I used. Then I used PM Hansen cause that's what they carry at the hobby store. Now I use GluBoost cause I bought some so there we go. One thing I know for sure is that I hate CA. But it does do things that nothing else can do so I put up with constantly glueing myself to things and finding CA getting into things it has no business being near... |
|
| Author: | Trevor Gore [ Fri Nov 10, 2017 9:31 pm ] |
| Post subject: | Re: Goodall guitars shop video |
Thanks, Ed. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|