Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Conveyor belt for PerFormax 16-32. Any good suggestions?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49842
Page 1 of 1

Author:  LanceK [ Sun Oct 22, 2017 6:50 am ]
Post subject:  Conveyor belt for PerFormax 16-32. Any good suggestions?

I’m looking for a new conveyor belt for my 16-32. I find several different suppliers on Amazon but I’m apprehensive to buy anything that is not OEM. Anybody have any experience with these?
Or any good suggestions?

Much thanks!

Author:  James Orr [ Sun Oct 22, 2017 10:11 am ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

Hey Lance! I replaced the belt for my 10-20 with one of those. It's been great so far.

Author:  Bri [ Sun Oct 22, 2017 11:19 am ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

http://www.woodworkingshop.com/product/pm26253/

Author:  CarlD [ Sun Oct 22, 2017 1:44 pm ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

https://2sand.com/feed-belt-performax-16-32-drum-sander

Author:  J De Rocher [ Sun Oct 22, 2017 1:50 pm ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

A timely thread for me as the feed belt on my 16-32 is getting pretty frayed at the edges. I'm looking forward to seeing what suggestions people have. Highland Woodworking has a replacement belt that looks more like the original one on my sander than the one Klingspor's offers: https://www.highlandwoodworking.com/drum-sander-conveyor-belt.aspx.

Author:  Woodie G [ Sun Oct 22, 2017 6:40 pm ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

We have been using the Highland Hardware replacement belts for at least 5 years, on both the Jet/Performax 10-20 and the newer 16-32...no issues and Highland is responsive to customer requests.

Author:  James Orr [ Mon Oct 23, 2017 10:55 am ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

Woodie G wrote:
We have been using the Highland Hardware replacement belts for at least 5 years, on both the Jet/Performax 10-20 and the newer 16-32...no issues and Highland is responsive to customer requests.


Yep. I should have noted above, but mine is also from Highland.

Author:  Mike Collins [ Mon Oct 23, 2017 1:41 pm ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

www.klingspor.com

Mc

Author:  Joe Beaver [ Mon Oct 23, 2017 2:43 pm ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

I got mine from amazon about a year ago. It seems fine
A&H Abrasives 156143, Sanding Belts, Aluminum Oxide, (y-weight), 16-1/4x43-1/2 Aluminum Oxide 120 Grit Feed Belt

Author:  Aaron O [ Tue Oct 24, 2017 1:06 am ]
Post subject:  Re: Conveyor belt for PerFormax 16-32. Any good suggestions?

I ordered the OEM Rubber belt, which I never really got to track well. But it was a nice belt, until I hit it with the drum, while it was running.

Ordered this years ago, and was just thinking I need to order another one.
https://www.amazon.com/Replacement-conv ... belt+16%22

Actually, I don't need to order one, I just want to. . .

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/