Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Since people are giving stuff away....
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49744		 Page 1 of 1
Author:  bcombs510 [ Sat Sep 23, 2017 12:43 pm ]
Post subject:  Since people are giving stuff away....
I have an LMI V1 binding cutting tower and carrier base. I've used it for the past couple years but recently picked up their new one. I'd like this to go to a new builder, but anyone is welcome to it. Just pay me for shipping.

The router collar is a little stripped so be aware of that. It's tricky getting bits in and out. If your using the typical rabbet bit from SM or LMI with the bearings, you should rarely have to take out the bit anyway.

Like I said, I'm hoping it will help out a new builder like it has for me. :)

Image

Image

Image

Brad


Sent from my iPhone using Tapatalk
Author:  Heath Blair [ Sat Sep 23, 2017 2:24 pm ]
Post subject:  Re: Since people are giving stuff away....
I don't personally need it, but that's a generous offer!
Author:  Alex Kleon [ Sat Sep 23, 2017 2:44 pm ]
Post subject:  Re: Since people are giving stuff away....
I made my own, but that would get someone started off on the right foot, for sure! Good going, Brad!

Alex
Author:  John Lewis [ Sat Sep 23, 2017 3:37 pm ]
Post subject:  Re: Since people are giving stuff away....
I'll take it if that's ok?
Author:  A.Hix [ Sat Sep 23, 2017 4:03 pm ]
Post subject:  Re: Since people are giving stuff away....
I'd love to take it if not too late.
Author:  A.Hix [ Sat Sep 23, 2017 4:03 pm ]
Post subject:  Re: Since people are giving stuff away....
Oh sorry, John, I didn't notice you asked first.
Author:  bcombs510 [ Sat Sep 23, 2017 4:29 pm ]
Post subject:  Re: Since people are giving stuff away....
Yes indeed, John. I'll connect with you in PM.


Sent from my iPhone using Tapatalk
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/