| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Glu-boost long shot... http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49407 |
Page 1 of 1 |
| Author: | meddlingfool [ Fri May 26, 2017 5:30 pm ] |
| Post subject: | Glu-boost long shot... |
Don't suppose anyone in Canada has a can of accelerant they'd be willing to part with? Doing some show guitars where every single day counts, can't order more til Monday. Trying to get stuff into the paint shop... |
|
| Author: | Chris Pile [ Fri May 26, 2017 5:43 pm ] |
| Post subject: | Re: Glu-boost long shot... |
Monday is a holiday in the states. |
|
| Author: | Tim Mullin [ Fri May 26, 2017 6:11 pm ] |
| Post subject: | Re: Glu-boost long shot... |
Contact Peggy White at pegmwhite@gmail.com She'll have stock in Canada and work with you on shipping. Sent from my iPhone using Tapatalk |
|
| Author: | Clay S. [ Fri May 26, 2017 8:59 pm ] |
| Post subject: | Re: Glu-boost long shot... |
Baking soda will make most super glues "kick". Wiping the parts with a damp cloth also tends to make it set up faster. I'm not familiar with gluboost products, but you could try dusting the parts with baking soda and see if it acts as most CA's do (test on scrap) |
|
| Author: | Bri [ Fri May 26, 2017 9:24 pm ] |
| Post subject: | Re: Glu-boost long shot... |
Kms tools sells accelerator, not glu-boost though. Richelieu does also B |
|
| Author: | meddlingfool [ Sat May 27, 2017 12:23 am ] |
| Post subject: | Re: Glu-boost long shot... |
Need glu-boost accelerant from Canada... Peggy is indisposed til Monday picking up a drum sander... Baking soda dies not seem like a good way to fill wenge pores... Not all accelerants are equal. Glu-boosts claims of drying clear are at least true... I knew it were a long shot 
|
|
| Author: | Ken Jones [ Sat May 27, 2017 2:10 am ] |
| Post subject: | Re: Glu-boost long shot... |
meddlingfool wrote: Not all accelerants are equal. Glu-boosts claims of drying clear are at least true... Now, even rubberier! I'd give you mine if I were in Canada. (I also get hazy, white spots from it.) Sent from my iPhone using Tapatalk Pro |
|
| Author: | meddlingfool [ Sat May 27, 2017 2:25 am ] |
| Post subject: | Re: Glu-boost long shot... |
Interesting. Did you use GB CA or a different brand with GB accelerant? Because I found the GB CA and its accompanying accelerant to provide the as advertised no blush, no pit, no yellowing clear glue job. |
|
| Author: | Clay S. [ Sat May 27, 2017 6:55 am ] |
| Post subject: | Re: Glu-boost long shot... |
"Baking soda dies not seem like a good way to fill wenge pores..." The Grand Canyon of woods..... Maybe you should use bondo colored with powder stains. 
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|