Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
D-18 style rosette recipe http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=49165 |
Page 1 of 1 |
Author: | dpetrzelka [ Tue Mar 21, 2017 9:53 am ] |
Post subject: | D-18 style rosette recipe |
Does this recipe for a mid-late 30's D-18 style rosette sound right to those of you who seen a few? Inner ring 0.020" Black maple Middle ring - .140" total b/w/b/W/B/W/b/w/b 0.040" b/w/b 0.060" w/b/w 0.040" b/w/b Outer ring 0.020 Black maple Greatly appreciate any thoughts. |
Author: | Clinchriver [ Tue Mar 21, 2017 10:12 am ] |
Post subject: | Re: D-18 style rosette recipe |
dpetrzelka wrote: Does this recipe for a mid-late 30's D-18 style rosette sound right to those of you who seen a few? Inner ring 0.020" Black maple Middle ring - .140" total b/w/b/W/B/W/b/w/b 0.040" b/w/b 0.060" w/b/w 0.040" b/w/b Outer ring 0.020 Black maple Greatly appreciate any thoughts. That should work, their really all over the place. A somewhat rule of thumb for spacing is .100 from the edge of the sound-hole for your first ring, from the outside of the first to the inside of the second ( your "9") .100 and from the outside of the second to the inside of the third .115 |
Author: | dpetrzelka [ Mon Apr 17, 2017 10:10 am ] |
Post subject: | Re: D-18 style rosette recipe |
Do any of you know the width of the purfling used on 1930's D-18s? It appears from images I've found that the inner black is thinner than the W/B/W W/B/W/b |
Author: | Casey Cochran [ Mon Apr 17, 2017 7:25 pm ] |
Post subject: | Re: D-18 style rosette recipe |
.010b/.010w/.010b/.025w/binding |
Author: | dpetrzelka [ Mon Apr 17, 2017 8:37 pm ] |
Post subject: | Re: D-18 style rosette recipe |
thank you both |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |