Ruby50 wrote:
His attention to detail is quite impressive.
Ed
Ed
Uh, the camera WAS on... Just sayin
I did rip off his clamping caul with the braided nylon tubing. Got something glueing up right now. Sweet!
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Mike Greenfield Video- worth a watch http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=48661 |
Page 1 of 1 |
| Author: | fingerstyle1978 [ Fri Dec 09, 2016 12:10 pm ] |
| Post subject: | Mike Greenfield Video- worth a watch |
This is not an instructional video but I picked up on a couple things that will definitely improve my process and thought I would share it here as well. https://www.youtube.com/attribution_lin ... video_user |
|
| Author: | Joe Beaver [ Sat Dec 10, 2016 2:45 pm ] |
| Post subject: | Re: Mike Greenfield Video- worth a watch |
It's a good one Joey. |
|
| Author: | Ruby50 [ Sun Dec 11, 2016 9:32 am ] |
| Post subject: | Re: Mike Greenfield Video- worth a watch |
Interesting way to make a neck. He cuts the flat part of the neck with the angled head out of a thick piece with many of them nestled back-to-front on their sides, then he glues on a solid block for the heel. Also, his nuts and saddles are quite thick. His attention to detail is quite impressive. Ed |
|
| Author: | rlrhett [ Sun Dec 11, 2016 12:56 pm ] |
| Post subject: | Re: Mike Greenfield Video- worth a watch |
Ruby50 wrote: His attention to detail is quite impressive. Ed Uh, the camera WAS on... Just sayin I did rip off his clamping caul with the braided nylon tubing. Got something glueing up right now. Sweet! |
|
| Author: | douglas ingram [ Mon Dec 12, 2016 12:11 am ] |
| Post subject: | Re: Mike Greenfield Video- worth a watch |
I saw it a couple of weeks ago, its a very good video. And, if you watch and listen carefully, there is a lot of useful info to be had! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|