| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Double sided roll of tape for pickguards http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=48488 |
Page 1 of 1 |
| Author: | ernie [ Fri Nov 04, 2016 3:22 pm ] |
| Post subject: | Double sided roll of tape for pickguards |
I bought a sheet of double sided tape from hobby lobby .but don/t like it much I used it to mount a spalted sycamore 1/16in pickguard on a baritone uke. I was watching john hall polish a tortoiseshell pickguard ina video and then he had a large roll of tape that he used to mount the pickguard .Does anyone know where I can buy some good tape at a reasonable price ?? thanks |
|
| Author: | Colin North [ Fri Nov 04, 2016 3:45 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
Any use? "Clear polyester tape with adhesive on both sides, for holding router templates and attaching acoustic guitar pickguards. 2" wide x 108 feet (50mm wide x 33 meters long)." http://www.stewmac.com/Materials_and_Supplies/Glues_and_Adhesives/Tapes_and_Adhesives/3M_Double-stick_Tape.html |
|
| Author: | ernie [ Fri Nov 04, 2016 4:45 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
thanks colin looking for tape that is wider that covers the whole pickguard |
|
| Author: | Colin North [ Fri Nov 04, 2016 5:22 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
http://www.ebay.com/itm/3M-300LSE-Double-Sided-SUPER-STICKY-HEAVY-DUTY-SHEET-OF-ADHESIVE-TAPE-/230983102051?hash=item35c7aa6e63:g:Tf8AAOxyYSdTCXbG |
|
| Author: | meddlingfool [ Fri Nov 04, 2016 6:35 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
|
|
|
| Author: | Pegasusguitars [ Sat Nov 05, 2016 2:29 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
I'm on my 2nd 6" wide roll of 3M 467. The rolls are very long, many hundreds of meters. Don't recall the exact length. 1st roll lasted 20 years and I'm about 10 years into the 2nd roll. If you keep it dry, the adhesive keeps just fine. I use it mostly for inlay, occasional pick guards, all my instrument labels, and jig holding. It is hard to find. First roll came from somewhere in Kentucky. When I needed my second roll, I called 3M corporate HQ to find it. They found me a place in Kansas City, which supplied the roll. Not cheap stuff, but worth every penny. Good luck. |
|
| Author: | ernie [ Sat Nov 05, 2016 4:33 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
thank you bob .I/m near KC so will look online |
|
| Author: | bcombs510 [ Sat Nov 05, 2016 6:50 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
Bob, is it this? https://www.amazon.com/3M-Adhesive-Tran ... rds=3M+467 |
|
| Author: | John Arnold [ Sat Nov 05, 2016 7:19 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
3M 467 or 465 is what I have used for many, many years. It is 2 mils of adhesive, no tape. I have bought 4", 6", and 12" wide rolls....all of which were 60 yards long. That is a bunch of pickguards. https://www.uline.com/Product/Detail/S-18771/Adhesive-Transfer-Tapes/3M-465-Adhesive-Transfer-Tape-Hand-Rolls-4-x-60-yds |
|
| Author: | Pegasusguitars [ Sun Nov 06, 2016 12:02 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
Yep, that's the stuff. Lots of different prices around. 6" wide rolls would be my preference. Good stuff! And as John said, it is not tape, just a very thin adhesive. |
|
| Author: | bluescreek [ Sun Nov 06, 2016 12:12 pm ] |
| Post subject: | Re: Double sided roll of tape for pickguards |
https://www.zoro.com/3m-adhesive-transf ... lsrc=aw.ds I use the same stuff |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|