| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Finally, a noble purpose for scrap wood... http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=48220 |
Page 1 of 1 |
| Author: | meddlingfool [ Thu Sep 01, 2016 3:27 pm ] |
| Post subject: | Finally, a noble purpose for scrap wood... |
https://www.facebook.com/QuiltedNorther ... 349222581/ |
|
| Author: | Joe Beaver [ Thu Sep 01, 2016 3:41 pm ] |
| Post subject: | Re: Finally, a noble purpose for scrap wood... |
American ingenuity at its finest !!! (and funniest) |
|
| Author: | Bryan Bear [ Thu Sep 01, 2016 3:46 pm ] |
| Post subject: | Re: Finally, a noble purpose for scrap wood... |
That seems like a lot of extra work to pulp it and everything. I just use a shop made plane with a wide blade. I peel long shavings off a 2x4. It is great because it is already rolled up. I mounted an old hacksaw blade on the TP dispenser so you can rip off the length you need; hand perforating is way overkill. The nice thing is, you can set the plane really fine if you need a softer roll. But don't go too fine or you may find yourself breaking through. |
|
| Author: | Chris Pile [ Thu Sep 01, 2016 3:49 pm ] |
| Post subject: | Re: Finally, a noble purpose for scrap wood... |
I'm sure the wood variety matters. Elm is very splintery. |
|
| Author: | Steve Marcq [ Fri Sep 02, 2016 10:53 am ] |
| Post subject: | Re: Finally, a noble purpose for scrap wood... |
It would give a whole new meaning to "poke through".. |
|
| Author: | doncaparker [ Fri Sep 02, 2016 11:47 am ] |
| Post subject: | Re: Finally, a noble purpose for scrap wood... |
Really looking forward to that Extra Virgin Birch. I'm all flush with excitement. |
|
| Author: | jfmckenna [ Fri Sep 02, 2016 12:48 pm ] |
| Post subject: | Re: Finally, a noble purpose for scrap wood... |
Wenge would be an excellent choice also. |
|
| Author: | Bryan Bear [ Fri Sep 02, 2016 1:42 pm ] |
| Post subject: | Re: Finally, a noble purpose for scrap wood... |
jfmckenna wrote: Wenge would be an excellent choice also. Too dark, you'll never know when you're done. . . |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|