| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Resaw DMV http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47925 |
Page 1 of 1 |
| Author: | dberkowitz [ Tue Jun 21, 2016 7:38 pm ] |
| Post subject: | Resaw DMV |
Anyone in the DC/MD/VA area with a resaw that can handle something 14" wide? My Delta won't cut it for this. |
|
| Author: | fingerstyle1978 [ Tue Jun 21, 2016 9:17 pm ] |
| Post subject: | Re: Resaw DMV |
I'm in Central VA with a 19" Grizzly Extreme 0514X2 with a Woodmaster CT. Max cut hieght is about 12", max throat is about 17.5 but you have to factor in room for the fence. What are you trying to cut? |
|
| Author: | dberkowitz [ Tue Jun 21, 2016 9:25 pm ] |
| Post subject: | Re: Resaw DMV |
12" won't do it. |
|
| Author: | fingerstyle1978 [ Tue Jun 21, 2016 9:31 pm ] |
| Post subject: | Re: Resaw DMV |
dberkowitz wrote: 12" won't do it. Oh my bad, I thought you meant 14" wide. Try Hibdon Hardwood, they'll have something big enough. |
|
| Author: | wbergman [ Wed Jun 22, 2016 4:53 am ] |
| Post subject: | Re: Resaw DMV |
Colonial Tonewoods has a Virginia address. |
|
| Author: | jfmckenna [ Wed Jun 22, 2016 7:59 am ] |
| Post subject: | Re: Resaw DMV |
Many years ago I used to go to Colonial Hardwoods (NOT Tonewoods) on Fullerton Drive in Springfield. They cut some big stuff for me. They also have a great selection of lumber too. Anytime I am up that way I stop off and pick up something there. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|