| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Dovetail Length http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47886 |
Page 1 of 1 |
| Author: | Fasterthanlight [ Sat Jun 11, 2016 8:51 am ] |
| Post subject: | Dovetail Length |
Hey Folks. How long (depth that it protrudes into the body) should the dovetail be on the neck joint? Or should i say what is the absolute minimum it should be? Thanks in advance. G. |
|
| Author: | Clinchriver [ Sat Jun 11, 2016 9:06 am ] |
| Post subject: | Re: Dovetail Length |
3/4 on the mortise (neck block) and 5/8 on the tenon(dovetail on neck) works would not want less than 1/2 on the tenon |
|
| Author: | Fasterthanlight [ Sat Jun 11, 2016 12:59 pm ] |
| Post subject: | Re: Dovetail Length |
Thank you. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|