| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| spray cleanup http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47852 |
Page 1 of 1 |
| Author: | mikemcnerney [ Sat Jun 04, 2016 11:37 am ] |
| Post subject: | spray cleanup |
I am now working on my samples using the Target EM6000 product & getting some acceptable beginner results. My question today is how long can I leave the finish in the siphon container & the gun without cleaning? Can I do 2 or 4 coats an hour apart? Or should I clean after each coat? Mike |
|
| Author: | Michaeldc [ Sat Jun 04, 2016 1:23 pm ] |
| Post subject: | Re: spray cleanup |
I've found that as long as I keep the outside of the fluid tip clean I can leave the material in the gun for a spray session like you described. I tend to clean my gun every time because I fear I'll forget to clean it otherwise. |
|
| Author: | Alex Kleon [ Sat Jun 04, 2016 3:02 pm ] |
| Post subject: | Re: spray cleanup |
I use General WB, and have used Target WB for cabinets, and leave the finish in the gun overnight with no issue. Alex |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|