| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Good Source for Mahogany sides for lams http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47835 |
Page 1 of 1 |
| Author: | fingerstyle1978 [ Mon May 30, 2016 9:54 pm ] |
| Post subject: | Good Source for Mahogany sides for lams |
I know RC Tonewoods sells them but they do not take requests on species and I haven't found them elsewhere. Any suggestions or should I just re-saw myself. Trouble is I haven't found a decent hardwood vendor around here yet. I really like everything to match and I pretty much use only mahogany for necks (unless laminated) and also inside the box for everything except the bridge plate and top bracing. |
|
| Author: | Pmaj7 [ Tue May 31, 2016 12:44 am ] |
| Post subject: | Re: Good Source for Mahogany sides for lams |
I would deff cut them yourself. Get a Woodslicer on a 14" bandsaw and you can cut 5" mahogany easy. IDK how thick you want, but with a well set up saw you could prob get 20 .065" slices fron a 2 1/4" billet. |
|
| Author: | mikemcnerney [ Tue May 31, 2016 8:44 am ] |
| Post subject: | Re: Good Source for Mahogany sides for lams |
certainlywood.com has 1/16" african hog & sapelle |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|