| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| thickness gauge mike doolin http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47742 |
Page 1 of 1 |
| Author: | pikolo [ Sat May 07, 2016 2:45 am ] |
| Post subject: | thickness gauge mike doolin |
I have seen a magnetic thickness gauge that it is rather cheap to be made.... here is a video of its assembly and how it works http://www.luth.org/images/web_extras/al109/Doolin_01.mp4 does someone know how to make this thing? or have the american luthiery 109 issue so as to give as dimensions and instructions?thansk alot! |
|
| Author: | SteveSmith [ Sat May 07, 2016 6:58 am ] |
| Post subject: | Re: thickness gauge mike doolin |
Have you contacted GAL to see if they have a back issue? |
|
| Author: | pikolo [ Sat May 07, 2016 7:32 am ] |
| Post subject: | Re: thickness gauge mike doolin |
i have contacted them but i live in Greece and it will take around a month or so to come here....also they also dont give out pdfs ....any ideas? thanks alot for your reply SteveSmith...really appreciate it! |
|
| Author: | SteveSmith [ Sat May 07, 2016 8:35 am ] |
| Post subject: | Re: thickness gauge mike doolin |
I'm on Tapatalk so didn't see your location. I do remember discussions about several folks wanting such a device, basically a home-made Hacklinger gauge. Unfortunately I don't have any additional information. Good luck with your search. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|