Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Extreme Flossing
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47707		 Page 1 of 1
Author:  bcombs510 [ Fri Apr 29, 2016 3:25 pm ]
Post subject:  Extreme Flossing


This looks interesting. :)
Author:  Colin North [ Fri Apr 29, 2016 3:45 pm ]
Post subject:  Re: Extreme Flossing
Brad, what type of file is that - I can't see it, just get a message "A plugin is needed to display this content"
Author:  bcombs510 [ Fri Apr 29, 2016 4:09 pm ]
Post subject:  Re: Extreme Flossing
It should be an inline youtube video. You'll need flash I believe, in order to play it. Here is a link without the inline youtube tag if it helps.

https://www.youtube.com/watch?v=8iXaR-86es4
Author:  SteveCourtright [ Fri Apr 29, 2016 4:11 pm ]
Post subject:  Re: Extreme Flossing
That's Marshall. He and his dad are amazing. I have seen his dad put together a flamenco guitar in a week, including French Polish finishing it.
Author:  Chris Pile [ Fri Apr 29, 2016 4:14 pm ]
Post subject:  Re: Extreme Flossing
It's YouTube...
Author:  bcombs510 [ Fri Apr 29, 2016 4:50 pm ]
Post subject:  Re: Extreme Flossing
Pretty cool approach. Seconds, not hours. :)
Author:  meddlingfool [ Fri Apr 29, 2016 5:08 pm ]
Post subject:  Re: Extreme Flossing
Nifty!
Author:  jfmckenna [ Fri Apr 29, 2016 5:15 pm ]
Post subject:  Re: Extreme Flossing
Wow that is really cool. I'm kind of surprised it works that well. Anytime I use power tools around a neck joint I make it worse! He's and entertaining personality as well. My only beef with it is... Where is the ear protection? idunno
Author:  Tom West [ Fri Apr 29, 2016 7:25 pm ]
Post subject:  Re: Extreme Flossing
I try to floss at least twice a day....................even at that I still wear a partial..!!!
Tom
Author:  Pmaj7 [ Fri Apr 29, 2016 11:53 pm ]
Post subject:  Re: Extreme Flossing
I like it. David Hurd had something like that set up using a band saw.
Author:  Guitarizzmo [ Sat Apr 30, 2016 1:39 am ]
Post subject:  Re: Extreme Flossing
That is one smart fixture, but I get terrified when I hear the sound of a sanding belt seam whipping across a work piece. The seamless ones are so much gentler on the machine and the work piece, and do a much better job. It begs to question why they aren't all seamless by now?
Author:  Colin North [ Sat Apr 30, 2016 3:41 am ]
Post subject:  Re: Extreme Flossing
I've seen a factory tour on youtube doing a similar operation to fit a neck butt joint, but can't remember which one.
Author:  truckjohn [ Sat Apr 30, 2016 7:02 am ]
Post subject:  Re: Extreme Flossing
I think that was Larivee...
Author:  meddlingfool [ Sat Apr 30, 2016 8:20 am ]
Post subject:  Re: Extreme Flossing
Nope, not Larrivee. Seagull/Simon&Patrick
Author:  Gary Gill [ Sat Apr 30, 2016 9:06 am ]
Post subject:  Re: Extreme Flossing
Thanks for sharing. Very initiative approach.
Author:  WilliamS [ Sat Apr 30, 2016 9:47 am ]
Post subject:  Re: Extreme Flossing
I remember reading his dad, R.E. Brune, describing this process many years ago. I think the article is in either the first or second Big Red book. If I recall, he borrowed the idea from a Japanese factory he visited back in the late '70's or early '80's (don't hold me to that-it's been at least 10 years since I read that article...and the article had been written at least 10-15 years prior to that).
Author:  kencierp [ Sun May 01, 2016 11:59 am ]
Post subject:  Re: Extreme Flossing
wrong thread
Author:  Brad Goodman [ Sun May 01, 2016 7:07 pm ]
Post subject:  Re: Extreme Flossing
Collings does something like this except with a router/pantograph type of machine that they built.
Author:  phil [ Mon May 02, 2016 8:15 pm ]
Post subject:  Re: Extreme Flossing
Wow! Thanks for sharing.
Author:  Quine [ Tue May 10, 2016 11:50 am ]
Post subject:  Re: Extreme Flossing
I need me one o' them!!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/