Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Malaysian Blackwood properties...
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47595
Page 1 of 1

Author:  meddlingfool [ Thu Apr 07, 2016 11:49 pm ]
Post subject:  Malaysian Blackwood properties...

Anyone used it? Would you put it as having more or less overtone potential than rosewood...

Author:  Toonces [ Fri Apr 08, 2016 10:37 am ]
Post subject:  Re: Malaysian Blackwood properties...

Less than Rosewood, it definitely acts as you would expect from an Ebony -- but out of the Ebonies, it is one of the most musical and resonant. I really enjoy Ebony back/side when paired with Engelmann, Redwood, or Cedar.

Author:  Tim Mullin [ Sat Apr 09, 2016 8:44 am ]
Post subject:  Re: Malaysian Blackwood properties...

One of my most spectacular sounding guitars was Malaysian Blackwood, but I suspect that has more to do with a high quality German spruce top and a bit of luck.

Be aware that "Malaysian Blackwood" is a tonewood supplier term that can refer to a large number of ebonies from Malaysia, where they are known and traded as "kayu malam" (literally "night wood"). There are many ebony species in this part of the world, and they are very difficult to identify as logs. The often-cited scientific name "Diospyros ebonasea" is complete fiction -- no such species exists on any recognized taxonomic list, although Diospyros is a genus in the Ebenaceae family. It's no wonder builders report so much variation in colour and figure.

Like all ebonies, in my experience, it is somewhat reluctant to bend and requires high temps. The sapwood and lighter areas of heartwood are more prone to bending failure, cracking, etc. than the darker areas.

Certainly a beautiful wood.
Image


Sent from my iPad using Tapatalk

Author:  Pmaj7 [ Sat Apr 09, 2016 1:42 pm ]
Post subject:  Re: Malaysian Blackwood properties...

I've built one with it (and bc Sitka) and I would say less, but rich and powerful. It tapped much livelier than African or macassar Ebonies and was quite dense and heavy, so ended up pretty thin. I think .070 & .080 on an OMish size.

Sent from my SM-T350 using Tapatalk

Author:  Tim Mullin [ Sat Apr 09, 2016 2:10 pm ]
Post subject:  Re: Malaysian Blackwood properties...

Tim Mullin wrote:
One of my most spectacular sounding guitars was Malaysian Blackwood, but I suspect that has more to do with a high quality German spruce top and a bit of luck.

Professional recording of MB guitar referred to earlier http://youtu.be/IEyLVA0BuEA

Author:  meddlingfool [ Sat Apr 09, 2016 7:53 pm ]
Post subject:  Re: Malaysian Blackwood properties...

Thanks folks!

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/