Thanks for the heads up, Alan. I've had my eye on a Proxxon rotary tool for a while, and that price was too good to pass up!
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Discontinued items at McFeely's http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47559 |
Page 1 of 1 |
| Author: | AlanC [ Sat Apr 02, 2016 9:02 am ] |
| Post subject: | Discontinued items at McFeely's |
Just a quick heads up.....I was ordering some inserts at McFeely's and noticed that there were quite a few items that they have discontinued and are selling at 1/2 price. Some of the items I saw: Pack of 5 stainless steel inserts for $5.10 Proxxon Professional rotary tool for $67.73 Work Sharp 2000 for $49.95. I haven't tried the Work Sharp 2000, but have the 3000 on my bench for a quick touch up on my chisels. Several different Freud and CMT router bits Alan |
|
| Author: | kencierp [ Sat Apr 02, 2016 9:59 am ] |
| Post subject: | Re: Discontinued items at McFeely's |
Anybody have and use the WorkSharp 2000? |
|
| Author: | Pmaj7 [ Sat Apr 02, 2016 10:12 am ] |
| Post subject: | Re: Discontinued items at McFeely's |
I have the 3000 and just noticed the wheel speed on the 2000 is 3x faster. 580 vs 17xx. Seems like that would make it a different beast. I have a slow speed grinder (17xx) and it's still fast enough to burn. |
|
| Author: | Zac Stout [ Sat Apr 02, 2016 5:02 pm ] |
| Post subject: | Re: Discontinued items at McFeely's |
Thanks for the heads up, Alan. I've had my eye on a Proxxon rotary tool for a while, and that price was too good to pass up!
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|