| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Picture of Todd Stock's vise bench holder....? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47455 |
Page 1 of 1 |
| Author: | Rod True [ Tue Mar 15, 2016 5:06 pm ] |
| Post subject: | Picture of Todd Stock's vise bench holder....? |
Does anyone have a saved picture of Todd Stock's bench extension that he made for his pattern maker vise? |
|
| Author: | Colin North [ Tue Mar 15, 2016 5:27 pm ] |
| Post subject: | Re: Picture of Todd Stock's vise bench holder....? |
Can't help with that but you can see some of it in this video towards the end https://www.youtube.com/watch?v=gc5hN3gTONM |
|
| Author: | Woodie G [ Tue Mar 15, 2016 9:26 pm ] |
| Post subject: | Re: Picture of Todd Stock's vise bench holder....? |
I have these picture files from the 'Jigs, Fixtures, and Tools' section of the building notes for a 'Repair Vise Mount', so I assume this is what you are looking for, Mr. True?. The accompanying text suggests the following: Vise Main Support: 2 x 8 dimensional SPF stock of bench height less thickness of vise platform Vise Platform: 7-1/2" x 8" x 2 layers of 18mm (3/4") hardwood plywood Vise Platform Supports (Corbels): Scraps of 2 x 8 stock, 2x 4-1/2" x ~ 14"-15" Hope this helps! |
|
| Author: | Rod True [ Tue Mar 15, 2016 9:48 pm ] |
| Post subject: | Re: Picture of Todd Stock's vise bench holder....? |
Brilliant! Thank you Woodie! Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|