Rigid laminate trimmer model #R2401. Hole spacing measures at 2 3/16" or 55mm, square layout.
Alex
Sent from my iPad using Tapatalk
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| I need your measurements http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47452 |
Page 1 of 1 |
| Author: | Chris Ensor [ Tue Mar 15, 2016 10:10 am ] |
| Post subject: | I need your measurements |
I am needing to collect some measurements. I am needing to know the hole spacing on different laminate trimmers and mini-routers bases(no full sized routers needed). What do you think OLF, can you help me out? Please denote the brand and model as well as the measurement(s) for your spacing. Thanks. |
|
| Author: | Bri [ Tue Mar 15, 2016 10:38 am ] |
| Post subject: | Re: I need your measurements |
Hi Chris, what specs are you wanting? I have 4 or 5 different ones I could measure. |
|
| Author: | Chris Ensor [ Tue Mar 15, 2016 11:41 am ] |
| Post subject: | Re: I need your measurements |
I am needing the hole spacing of the screws that hold the plastic plate to the base of the trimmer/router. |
|
| Author: | Pat Foster [ Tue Mar 15, 2016 11:44 am ] |
| Post subject: | Re: I need your measurements |
Perhaps you could list what you already have so there's no duplication. I have a Porter Cable 3102 and 7301, and a Makita 3709. Pat |
|
| Author: | Pwoolson [ Tue Mar 15, 2016 2:48 pm ] |
| Post subject: | Re: I need your measurements |
I've got bosch colt base plate plans drawn up in cad if you want them. |
|
| Author: | Alex Kleon [ Tue Mar 15, 2016 3:13 pm ] |
| Post subject: | Re: I need your measurements |
Rigid laminate trimmer model #R2401. Hole spacing measures at 2 3/16" or 55mm, square layout. Alex Sent from my iPad using Tapatalk |
|
| Author: | Bri [ Tue Mar 15, 2016 5:55 pm ] |
| Post subject: | Re: I need your measurements |
Bosch Colt pr10 3" x 2.72" Dewalt dwp 611 2.42" square, but there are 4 more holes asymetrically placed. all holes are at 1.73" radius c-c from the center of the collet. I can measure the PC when I get home. |
|
| Author: | Chris Ensor [ Tue Mar 15, 2016 9:29 pm ] |
| Post subject: | Re: I need your measurements |
Thanks everybody. Keep them coming. I need as many as possible. |
|
| Author: | Colin North [ Wed Mar 16, 2016 3:42 pm ] |
| Post subject: | Re: I need your measurements |
Makita RT0700C I make it 54 mm x 45 mm, long side towards the catch. |
|
| Author: | Bri [ Wed Mar 16, 2016 9:42 pm ] |
| Post subject: | Re: I need your measurements |
PC7301 As you can see, multiple holes The plastic base mounts to the 3 lower holes in the pic. 2-11/32" across l-r -21/32 from l or right to the lower On the boss with the 2 holes the upper one is the bottom end of the depth adjuster. The other on that boss and the one to the right are 1" apart. The upper 2 are 2-1/16" apart. |
|
| Author: | Mike2E [ Sat Mar 19, 2016 12:17 am ] |
| Post subject: | Re: I need your measurements |
Colin North wrote: Makita RT0700C I make it 54 mm x 45 mm, long side towards the catch. My Makita RTO700C has a trapezoid base pattern , one side 54 mm and the side parallel to this 56 mm, each of these spaced by 45 mm. From collet centre to holes 56 mm apart the radius is 38.25 mm. From collet centre to the 45 mm spaced holes the radius is 33 mm Rebel tools REB500T has square base hole pattern 58 mm |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|