Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Neuronic Terz
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47229
Page 1 of 1

Author:  Pat Hawley [ Sun Feb 07, 2016 6:52 pm ]
Post subject:  Neuronic Terz

Hi all,
When I was posting about making a fret board inlay representative of neurons on a little Terz guitar, one of you asked if I would post pictures of the completed project. So here are a few pictures. It's got a curly redwood top with Hormigo back and sides. The bridge is Brazilian rosewood. I'm very happy with this guitar. It's surprising how much volume a little guitar can produce. Thanks for looking.

Image

Image

Image

Image

Pat

Author:  Clay S. [ Sun Feb 07, 2016 7:09 pm ]
Post subject:  Re: Neuronic Terz

looks really synapsey! [clap]

Author:  Rocky Road [ Sun Feb 07, 2016 8:04 pm ]
Post subject:  Re: Neuronic Terz

Great looking guitar. Really nice work.


Sent from my iPhone using Tapatalk

Author:  Imbler [ Sun Feb 07, 2016 8:19 pm ]
Post subject:  Re: Neuronic Terz

Beautiful guitar, Pat!
Mike

Author:  sdsollod [ Sun Feb 07, 2016 8:23 pm ]
Post subject:  Re: Neuronic Terz

Cool. 8-)

Author:  Durero [ Sun Feb 07, 2016 10:31 pm ]
Post subject:  Re: Neuronic Terz

Very nice!


Sent from my iPhone using Tapatalk

Author:  J De Rocher [ Sun Feb 07, 2016 10:40 pm ]
Post subject:  Re: Neuronic Terz

Love it. Nicely done.

Author:  tysam [ Sun Feb 07, 2016 11:03 pm ]
Post subject:  Re: Neuronic Terz

That turned out great, Pat. Good job.

Author:  jeanmiv [ Sun Feb 07, 2016 11:04 pm ]
Post subject:  Re: Neuronic Terz

Great job!


Sent from my iPad using Tapatalk

Author:  Colin North [ Mon Feb 08, 2016 3:44 am ]
Post subject:  Re: Neuronic Terz

[:Y:]

Author:  Hesh [ Mon Feb 08, 2016 6:06 am ]
Post subject:  Re: Neuronic Terz

That's pretty cool Pat! Very nicely done AND unique too!

Author:  Pat Hawley [ Mon Feb 08, 2016 8:53 am ]
Post subject:  Re: Neuronic Terz

Thanks for the nice comments everyone.
Cheers,
Pat

Author:  Alex Kleon [ Mon Feb 08, 2016 9:45 am ]
Post subject:  Re: Neuronic Terz

One of a kind beauty, Pat! What finish did you use? I like the way it shows the curl in the redwood.

Alex

Author:  Pat Hawley [ Mon Feb 08, 2016 4:07 pm ]
Post subject:  Re: Neuronic Terz

Thanks Alex. The finish is UV cured polyester from www.cureuv.com
Pat

Author:  bcombs510 [ Mon Feb 08, 2016 4:49 pm ]
Post subject:  Re: Neuronic Terz

Pat Hawley wrote:
Thanks Alex. The finish is UV cured polyester from http://www.cureuv.com
Pat


Looks interesting, Pat.

They have only one recommended sprayer, the binks. What do you use?

Author:  Pat Hawley [ Mon Feb 08, 2016 6:57 pm ]
Post subject:  Re: Neuronic Terz

Brad, I use the mini spray gun from this kit I got from Home Depot: https://www.homedepot.ca/en/home/p.lvlp ... 18438.html I wasn't really after two spray guns, I just wanted a mini LVLP. However after looking around quite a bit, this seemed like the best option. Nothing special but it seems to do the job just fine using my small, 8 gallon, compressor. I use an air pressure of 40 - 45 psi as measured at the tank.
Pat

Author:  Joe Beaver [ Mon Feb 08, 2016 9:30 pm ]
Post subject:  Re: Neuronic Terz

Love it Pat. Neurology speaking it appears excellent to me.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/