Official Luthiers Forum! http://www.luthiersforum.com/forum/
Dyed veneer for center strip http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47106	Page 1 of 1

---

Author:	Goodin [ Wed Jan 20, 2016 10:56 am ]
Post subject:	Dyed veneer for center strip
Has anyone used a dyed veneer for a center strip on a neck? I'm curious if there would be any issues with glue adhesion or structural stability. Some veneer suppliers state that the veneers are bleached and pressure dyed for 100% penetration. I'm not sure what that would do to the stability and glue up. I am looking for a substitute for ebony to use as a center strip.

---

Author:	Barry Daniels [ Wed Jan 20, 2016 11:00 am ]
Post subject:	Re: Dyed veneer for center strip
I have never had a problem with dyed veneer and have been using it a long time. I have also never seen a report of anyone else having problems either.

---

Author:	MaxBishop [ Wed Jan 20, 2016 11:33 am ]
Post subject:	Re: Dyed veneer for center strip
+1

---

Author:	ernie [ Wed Jan 20, 2016 11:34 am ]
Post subject:	Re: Dyed veneer for center strip
plus 2

---

Author:	DannyV [ Wed Jan 20, 2016 12:04 pm ]
Post subject:	Re: Dyed veneer for center strip
+3

---

Author:	kencierp [ Wed Jan 20, 2016 12:16 pm ]
Post subject:	Re: Dyed veneer for center strip
We (KMG) have always used dyed veneer for our laminated neck striping. Constantine's is our supplier.

---

Author:	Goodin [ Wed Jan 20, 2016 12:34 pm ]
Post subject:	Re: Dyed veneer for center strip
Thanks guys!

---

Author:	TonyKarol [ Wed Jan 20, 2016 2:05 pm ]
Post subject:	Re: Dyed veneer for center strip
dozens of times ...... it'll be fine ...

---

Author:	Brad Goodman [ Wed Jan 20, 2016 6:27 pm ]
Post subject:	Re: Dyed veneer for center strip
I have used it for 20 years-no problem. I get mine from Certainlywood.com

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/