Official Luthiers Forum!
http://www.luthiersforum.com/forum/

CLS binding jig is back!
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=47088		 Page 1 of 1
Author:  Josh H [ Mon Jan 18, 2016 4:03 pm ]
Post subject:  CLS binding jig is back!
I’m really happy to announce that after a long delay trying to source a new supplier for parts, I will soon have my binding jig back in production! I’m taking pre-orders now from anyone who wants to reserve a jig from the next run of 20. I am also offering a shipping special to anyone who preorders the jig.

More info can be found at this link, and I will gladly send a PDF copy of the instructions for the jig to anyone who wants them. It gives a more detailed explanation of the setup and operation of the jig.
http://www.canadianluthiersupply.com/products/binding-jig

If you are in the US please take note that the exchange rage between the US and CAD is at a 12 year high! This means that USD price you pay approximately 35% less than the prices listed on my website. You save on product and shipping. If you’ve been thinking about some radius dishes, Troji or binding jig, there is no better time than now.

Please contact if you have any questions.

Thanks
Author:  yukonarizona [ Thu Jan 21, 2016 4:42 pm ]
Post subject:  Re: CLS binding jig is back!
Thanks Josh, I've just sent payment. I should have a couple of builds ready for binding and purling ledges when the jig arrives.
Author:  Alex Kleon [ Thu Jan 21, 2016 5:43 pm ]
Post subject:  Re: CLS binding jig is back!
[xx(] Canadian Dollar [xx(]

Alex
Author:  Josh H [ Fri Jan 22, 2016 6:57 am ]
Post subject:  Re: CLS binding jig is back!
yukonarizona wrote:
Thanks Josh, I've just sent payment. I should have a couple of builds ready for binding and purling ledges when the jig arrives.


I received it thanks!

Alex Kleon wrote:
[xx(] Canadian Dollar [xx(]

Alex


I've placed orders with LMI and SM in the past week, not fun with where the exchange rate is at. This is where it was when I started my business 13 years ago, I didn't know if it would ever fall back that far.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/