| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Latest - Slope Shoulder Dread - No pickguard... http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=46698 |
Page 1 of 1 |
| Author: | sdsollod [ Fri Nov 20, 2015 4:05 pm ] |
| Post subject: | Latest - Slope Shoulder Dread - No pickguard... |
Here is my latest. This is number 12. Still haven't sold any yet (not sure how to go about it). I just love making them... This is the one I recently referred to in a previous post about whether to use a pickguard or not. After i shot these photos i put on a clear one. One of the Stew Mac mylar ones. Very easy to do and you can't even see it. Heres the specs on this one... Tzalam (Mayan Walnut) back & sides Sitka spruce top Laminated mahogany and maple neck Macasser ebony fingerboard and bridge Ebony headplate Figured maple binding and back wedge Multi-species rosette, end wedge, and purfling Adi and carpathian spruce bracing Evo fretwire Abalone diamond position makers Grover open back tuners EM6000 finish over zpoxy 24.9" scale length 1.75" at the nut, 2 3/16" spacing at the bridge She's sounding pretty decent at this point. I'm looking forward to the blossoming to come. Thanks for all the support from the OLF folks. |
|
| Author: | J De Rocher [ Fri Nov 20, 2015 4:14 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
That's an all around great looking guitar. Elegant headstock shape and I like your use of the curly maple throughout. The design used for the rosette and tail wedge is very cool. Nice purfling too. |
|
| Author: | DannyV [ Fri Nov 20, 2015 4:19 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Isn't that a beauty! Love the way you tied it all together. |
|
| Author: | klooker [ Fri Nov 20, 2015 4:23 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Very nice! |
|
| Author: | Haans [ Fri Nov 20, 2015 4:34 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Very nice for what it is... |
|
| Author: | Alex Kleon [ Fri Nov 20, 2015 4:55 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Nice bit of work there, Steve! I'm still trying to find the pick guard! Alex |
|
| Author: | cablepuller1 [ Fri Nov 20, 2015 5:26 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Great great looking guitar... get selling mate they would be queuing round the block to buy |
|
| Author: | tysam [ Fri Nov 20, 2015 8:56 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Good job, Steve |
|
| Author: | Shaw [ Fri Nov 20, 2015 9:24 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Beautiful work...Put some ads up at local live music venues/clubs and check out if there is any type of publication related to live music in your area. Sent from my SGH-T599 using Tapatalk |
|
| Author: | meddlingfool [ Sat Nov 21, 2015 1:05 am ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Nice job! |
|
| Author: | Hesh [ Sat Nov 21, 2015 5:28 am ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Very nice!!! |
|
| Author: | George L [ Sat Nov 21, 2015 4:45 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Well done! Nice job of letting the figure of the Tzalam influence your design and then integrating the look throughout the instrument. |
|
| Author: | WaddyThomson [ Sun Nov 22, 2015 12:22 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Excellent looking guitar. Well done! |
|
| Author: | Quine [ Mon Nov 23, 2015 12:50 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
Sweet. I like that purfling, rosette, butt graft coordination |
|
| Author: | Chuck [ Tue Nov 24, 2015 1:39 pm ] |
| Post subject: | Re: Latest - Slope Shoulder Dread - No pickguard... |
That guitar is just stunning with the headstock, rosette and finish. Just outstanding. Chuck |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|