Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Finally Finished #'s 3 & 4
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=44815
Page 1 of 1

Author:  Glenn LaSalle [ Thu Jan 01, 2015 11:09 am ]
Post subject:  Finally Finished #'s 3 & 4

Strung up Numbers 3 & 4. Vast improvement over Numbers 1 & 2, yet a ton of improvement still needed! I like how they both sound:

Guitar # 3: My take on a Prairie State Guitar, more shape etc, than from actual construction. This was modeled after my old Franklin Prairie State made in '85, which was modeled after Stefan Grossman's PS.

- Madagascar RW B&S
- Bearclaw Sitka top
- Ebony FB, Bridge, Headplate
- Curly Koa Bindings, end wedge
- Koa/Maple Purfling
- Spalted Maple Rosette
- French Polish top, Tru Oil B&S, and neck
Attachment:
DSCN2394.JPG

Attachment:
IMG_3407.jpg

Attachment:
DSCN2393.JPG


Guitar #4: OM
- African Mahogany B&S
- Lutz top
- Zebrawood Bindings, end wedge, rosette
- Macassar Ebony Fingerboard, Bridge, Headplate
- French Polish Top, Tru Oil B&S, and neck
Attachment:
DSCN2429.JPG

Attachment:
DSCN2424.JPG

Attachment:
DSCN2423.JPG


Thanks!

Glenn

Author:  jack [ Thu Jan 01, 2015 11:16 am ]
Post subject:  Re: Finally Finished #'s 3 & 4

Nice looking guitars Glenn

Author:  George L [ Thu Jan 01, 2015 12:14 pm ]
Post subject:  Re: Finally Finished #'s 3 & 4

Well done, Glenn. That Prairie State is a monster! I what you've done with the fretboard and headstock on the OM. Nice work!

Author:  Glen H [ Thu Jan 01, 2015 1:53 pm ]
Post subject:  Re: Finally Finished #'s 3 & 4

Very nice!

Author:  Joe Beaver [ Thu Jan 01, 2015 3:58 pm ]
Post subject:  Re: Finally Finished #'s 3 & 4

Beautiful work !!!

Author:  meddlingfool [ Thu Jan 01, 2015 6:18 pm ]
Post subject:  Re: Finally Finished #'s 3 & 4

Nice!

Love your outlet cover!

Author:  Colin North [ Fri Jan 02, 2015 5:24 pm ]
Post subject:  Re: Finally Finished #'s 3 & 4

Fine work Glenn

Author:  Glenn LaSalle [ Fri Jan 02, 2015 10:07 pm ]
Post subject:  Re: Finally Finished #'s 3 & 4

Thanks Guys!

Glenn

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/