| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| ASIA Symposium scheduled for June 2015 http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=44005 |
Page 1 of 1 |
| Author: | bluescreek [ Tue Aug 19, 2014 10:53 am ] |
| Post subject: | ASIA Symposium scheduled for June 2015 |
"The ASIA Symposium 2015 will be on June 10-14 2015. This will be at East Stoudsburg PA We are in the early planning stages of planning. Anyone that would like to be a presenter contact bear_acker@hotmail.com The vendor and presenter list will be mad available once the details are nailed down. I will certainly be there hope to see as many of you as I can |
|
| Author: | Rodger Knox [ Tue Aug 19, 2014 11:54 am ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
I'll be there! I'm going for the whole thing this time, I was only able to make the last day last time. |
|
| Author: | bluescreek [ Tue Aug 19, 2014 1:10 pm ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
I will post more info as it becomes available |
|
| Author: | JSDenvir [ Wed Aug 20, 2014 11:11 am ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
Wouldn't miss it. |
|
| Author: | Rick Cowan [ Thu Aug 21, 2014 8:19 pm ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
My turn to pick you up on the way through Steve. Looking forward to it. Rick |
|
| Author: | bluescreek [ Fri Aug 22, 2014 7:55 am ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
if you have subject that you would like covered let us know so far repair round table discussion Advanced Bending techniques Neck setting and body geometry we are open for suggestions thanks |
|
| Author: | Fred Tellier [ Fri Aug 22, 2014 10:34 am ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
I will be there, probably stop at my mother in laws place in Tennessee for a couple days rest between Memphis and the ASIA. Will be a great couple weeks. Fred |
|
| Author: | Andy Birko [ Fri Aug 22, 2014 12:24 pm ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
I'm pretty sure I'll be headed to this one. |
|
| Author: | Dave Rickard [ Sat Aug 23, 2014 12:57 pm ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
I plan on going,Probably swing through Indy on the way and drop Sandy off so she can visit with friends and family. If that happens I might be able to pick someone up between Indy and ASIA. |
|
| Author: | Dave Rickard [ Sun Aug 24, 2014 7:51 am ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
bluescreek wrote: if you have subject that you would like covered let us know so far repair round table discussion Advanced Bending techniques Neck setting and body geometry we are open for suggestions thanks If some one could give a demo on neck making. Thats an area I struggle with. |
|
| Author: | bluescreek [ Sun Aug 24, 2014 9:09 am ] |
| Post subject: | Re: ASIA Symposium scheduled for June 2015 |
that may be doable I know Andy is CNCing them but I will see if I can figure something out for making necks jh |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|