| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Bridge Placement, Neck length on an OM Baritone http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=43820 |
Page 1 of 1 |
| Author: | fingerstyle1978 [ Thu Jul 17, 2014 1:33 am ] |
| Post subject: | Bridge Placement, Neck length on an OM Baritone |
I have a neck already build that is 14.5" from nut to body. Leaving 13.2" to the saddle, which seems doable. Also about how much of the bridge should cross the X Braces and is that a better method than using the holes for the strings to determine the x-brace placement? I have a nice matching Macassar bridge and fretboard to match this B&S. I do prefer things to match but the black ebony wouldn't bother me either. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|