| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| WTB spalted wood veneer http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=43758 |
Page 1 of 1 |
| Author: | Beth Mayer [ Fri Jul 04, 2014 6:05 pm ] |
| Post subject: | WTB spalted wood veneer |
I want to use a spalted wood on an arm bevel (to echo a small bit of spalting in the rosette and sapwood back. Anyone have a sheet or two of an appropriate arm bevel size that they would be willing to sell. I couldn't find any in the usual places I look for veneer (Rockler, woodcraft, RC). Thanks, Beth |
|
| Author: | wbergman [ Fri Jul 04, 2014 8:25 pm ] |
| Post subject: | Re: WTB spalted wood veneer |
http://www.ebay.com/itm/spalted-pecan-e ... 58b1ce88ce You might try ebay and just buy a chunk of wood and slice off what you need. For example, above. |
|
| Author: | dzsmith [ Fri Jul 04, 2014 8:54 pm ] |
| Post subject: | Re: WTB spalted wood veneer |
http://www.veneersupplies.com/categorie ... brosia%29/ Will ambrosia Maple work? |
|
| Author: | Beth Mayer [ Fri Jul 04, 2014 8:57 pm ] |
| Post subject: | Re: WTB spalted wood veneer |
dzsmith wrote: http://www.veneersupplies.com/categories/Veneer__Products/Wood__Veneer__M__-__Z/Maple__%28Ambrosia%29/ Will ambrosia Maple work? This looks to be a possibility. Wanted something I didn't have to cut, and I think this might do the trick. Thanks Guys! |
|
| Author: | Gasawdust [ Fri Jul 04, 2014 9:46 pm ] |
| Post subject: | Re: WTB spalted wood veneer |
Give me your desired dimension and I'll send you a few pieces of well spalted birch. No cost. |
|
| Author: | Beth Mayer [ Fri Jul 04, 2014 10:17 pm ] |
| Post subject: | Re: WTB spalted wood veneer |
Gasawdust wrote: Give me your desired dimension and I'll send you a few pieces of well spalted birch. No cost. That would be wonderful! I would think maybe 3" x 10-12 " would be perfect. Please let me know your PayPal so I can pay shipping at least!!! |
|
| Author: | Gasawdust [ Sat Jul 05, 2014 6:34 am ] |
| Post subject: | Re: WTB spalted wood veneer |
You are welcome. Do you have a desired thickness? Also need a shipping address. I'll send it out on Monday.. |
|
| Author: | DannyV [ Sat Jul 05, 2014 10:42 am ] |
| Post subject: | Re: WTB spalted wood veneer |
I don't know a source but that will look very cool. |
|
| Author: | Beth Mayer [ Sat Jul 05, 2014 9:35 pm ] |
| Post subject: | Re: WTB spalted wood veneer-Solved :) |
Hey Guys, Thanks for the help and comments. I PM'd Brian and wanted to let you all know that my customer changed her mind about the spalted bevel. We're doing EIR to match the FB and Bridge instead. Wait till you see the set of SE Asian Rosewood I am using. Bought it from LMI 3 years ago and now it's unavailable, but it rings FOREVER when tapped! Never heard anything like it (in my very limited experience of tapping wood). |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|