| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Kirfing http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=43544 |
Page 1 of 1 |
| Author: | William hopper [ Wed May 28, 2014 10:29 am ] |
| Post subject: | Kirfing |
Can western red cedar be used for kirfing without problems. Also sources for spanish cedar |
|
| Author: | jfmckenna [ Wed May 28, 2014 10:35 am ] |
| Post subject: | Re: Kirfing |
I've used WWC on several guitars and it works just fine. Nice and light and smells great. Grain orientation is important if you use a plane to get your linings flush and angled because it tends to be more brittle then spruce or basswood. IF they do pop out though then you can just glue them back. |
|
| Author: | ernie [ Tue Jun 03, 2014 8:05 am ] |
| Post subject: | Re: Kirfing |
WRC, for wrc tops. laminated 3/32in hdwds for back , maple oak hickory pecan ash |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|