| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Vacuum bag size for laminating sides http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42622 |
Page 1 of 1 |
| Author: | sprouseod [ Mon Feb 03, 2014 8:29 pm ] |
| Post subject: | Vacuum bag size for laminating sides |
I want to give this a try. For those of you who use vac bags for laminating your sides. what size do you recommend? Thanks Richard |
|
| Author: | DYeager [ Thu Feb 27, 2014 8:57 am ] |
| Post subject: | Re: Vacuum bag size for laminating sides |
Don't get too small a bag - if you're laminating over a mold, the bag should be large enough to allow a lot of drape, in order to press everywhere. The 4 X 4 footer from Vacuum Pressing is adequate, and the least expensive vinyl number has all the flexibility and durability you'll want. My bags have done hundreds of parts each, and they show no signs of dying. Dan |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|