| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Woolsen neck jig question http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42568 |
Page 1 of 1 |
| Author: | Randolph [ Tue Jan 28, 2014 10:26 am ] |
| Post subject: | Woolsen neck jig question |
I have the Woolsen neck jig plans. Does anyone have a picture of what it looks like when complete? Is there a tutorial of any kind on the construction process or how it operates? |
|
| Author: | Michael Lloyd [ Thu Jan 30, 2014 12:56 pm ] |
| Post subject: | Re: Woolsen neck jig question |
If you Google "Paul Woolson neck jig" there's plenty of information available. Regards, |
|
| Author: | ZekeM [ Thu Jan 30, 2014 1:46 pm ] |
| Post subject: | Woolsen neck jig question |
Does this help?? http://m.youtube.com/watch?v=v-uILpnd9kw EDIT: Sorry that's for the Simpson. How about this: http://m.youtube.com/watch?v=If9EokfWogo |
|
| Author: | Randolph [ Thu Jan 30, 2014 2:11 pm ] |
| Post subject: | Re: Woolsen neck jig question |
Michael, both of these videos are extremely helpful. The second one is for Robbie Obrien's jig. From the looks of it, though it is pretty close to the woolsen setup. Thanks for the tip!! Zeke, you are right. I didn't know his first name. That did the trick. I'm sure I can easily get it from here. Thanks for your help! |
|
| Author: | uvh sam [ Thu Jan 30, 2014 10:12 pm ] |
| Post subject: | Re: Woolsen neck jig question |
How much fitting do you have to do with a jig like this? Seems like it would be just as fast to just set the neck the old fashioned way. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|