Official Luthiers Forum! http://www.luthiersforum.com/forum/
Plastic Caps for 3/8in fiberglass rods http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=42469	Page 1 of 1

---

Author:	ernie [ Wed Jan 15, 2014 12:13 pm ]
Post subject:	Plastic Caps for 3/8in fiberglass rods
I bought fiberglass 50 rods and need plastic caps. I think todd and others posted a source.?? thanks.

---

Author:	Colin North [ Wed Jan 15, 2014 12:44 pm ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
Kite shop.

---

Author:	RusRob [ Wed Jan 15, 2014 12:50 pm ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
I just used hot glue. Not hide glue but a hot glue gun. Or you can get some of that rubber dip made for tool handles. Both are available at your local hardware store.

---

Author:	ernie [ Wed Jan 15, 2014 1:19 pm ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
gud idea rob!.I just bought sprayed on rubber some 2mo. ago thank you

---

Author:	Terence Kennedy [ Wed Jan 15, 2014 1:37 pm ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
Ask for "thread protectors" at Ace

---

Author:	Bob Shanklin [ Wed Jan 15, 2014 5:27 pm ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
https://goodwinds.com/vec-375.html Bob

---

Author:	ernie [ Fri Jan 17, 2014 9:10 am ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
Thanks bob, and everyone, ordered 100 caps from goodwind , they also carry a lot of carbon fiber products , for those who use them.

---

Author:	JimWomack [ Fri Jan 17, 2014 9:18 am ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
I used Plasti-Dip. You know, the rubberized coating they use for tool handles and such. I picked up a small can at Home Depot for a few bucks.

---

Author:	RustySP [ Fri Jan 17, 2014 12:02 pm ]
Post subject:	Re: Plastic Caps for 3/8in fiberglass rods
Just curious, what are the 3/8 rods for, not go bars right?

---

Page 1 of 1	All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/