Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
Hide Glue and soundboard transducers http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=41564 |
Page 1 of 1 |
Author: | Dave Baley [ Wed Oct 02, 2013 5:30 pm ] |
Post subject: | Hide Glue and soundboard transducers |
Sorry if this has been covered before. I did a search and didn't find any complete answers, only a couple mentions of it. Does anyone have any experience with attaching Sound Board Transducers (like the K and K Pure MIni) with HHG instead of the recommended and supplied super glue gel? I am hoping for good vibration transmission but easier removal if neccesary. thanks Dave |
Author: | nyazzip [ Wed Oct 02, 2013 7:50 pm ] |
Post subject: | Re: Hide Glue and soundboard transducers |
i was wondering the same myself. i think it should work great; hide glue dries hard/brittle and crystalline. may even be superior to CA for this purpose... |
Author: | Rod True [ Wed Oct 02, 2013 8:00 pm ] |
Post subject: | Re: Hide Glue and soundboard transducers |
CA would be easier to remove a transducer I think, with just some acetone, no heat required. They work just fine with the CA attachment AFAIC. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |