Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Visit to Andy Birko's shop
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40999
Page 1 of 1

Author:  Fred Tellier [ Tue Jul 30, 2013 4:19 pm ]
Post subject:  Visit to Andy Birko's shop

List member Paul Murphy and I spent the morning at Andy's shop checking out his CNC machine and his Banduras. We cut a Fan fret fingerboard for a project I am starting and I was impressed by his machine and the software he uses to create the tool paths. I usually cut my own fingerboards but for a fan fret the CNC seems to be a great way to get it done.

Here are a couple pictures from Andy's shop

Image

Image

Image

Image

Image

Fred

Author:  mqbernardo [ Tue Jul 30, 2013 4:20 pm ]
Post subject:  Re: Visit to Andy Birko's shop

cool! i like the look on Andy´s face on that last pic...

Author:  Tony_in_NYC [ Tue Jul 30, 2013 5:15 pm ]
Post subject:  Re: Visit to Andy Birko's shop

It's always fun to visit with other members. Looks like a good day.


Sent from my iPhone using Tapatalk 2

Author:  dzsmith [ Tue Jul 30, 2013 6:09 pm ]
Post subject:  Re: Visit to Andy Birko's shop

Thanks for sharing, very cool and interesting!

Author:  Paul Burner [ Wed Jul 31, 2013 7:17 am ]
Post subject:  Re: Visit to Andy Birko's shop

Hey Fred - can we use these photos on Andy's website? (I'm helping him with it)

Author:  Fred Tellier [ Wed Jul 31, 2013 7:45 am ]
Post subject:  Re: Visit to Andy Birko's shop

No problem Paul, I have a few others also.

Fred

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/