| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| PolyWhey Over Lacquer http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40946 |
Page 1 of 1 |
| Author: | Dan Pennington [ Mon Jul 22, 2013 11:47 am ] |
| Post subject: | PolyWhey Over Lacquer |
I'm using StewMac Red Mahogany tinted lacquer to hide the terrible job I did on a sunburst on my Beard resonator kit guitar. I don't want to do clear coats of lacquer on top of it. I breathed enough lacquer doing the color - even with a good mask. I'd like to do the top coats in PolyWhey. Anybody done that? |
|
| Author: | SteveSmith [ Mon Jul 22, 2013 12:24 pm ] |
| Post subject: | Re: PolyWhey Over Lacquer |
You could call the folks at Vermont Coatings and ask - they're very helpful. I suspect at a minimum you would need a few coats of shellac to seal. I wonder if anything from the lacquer might bleed through over time? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|