Chuck, I believe this is the sander you are talking about. It's a Craftsman, and I put a link to the website you probably saw it on below the pic.
http://kennethmichaelguitars.com/secrets.html
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| What was the sander? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40932 |
Page 1 of 1 |
| Author: | Chuck [ Sat Jul 20, 2013 11:39 pm ] |
| Post subject: | What was the sander? |
The other day I was surfing different luthier sights and on one of them, which I forgot to bookmark, the luthier was using a sander that had a sanding bottom much like the three heads on a Norelco razer. It had three little what looked like flap wheels that each rotated independently of each other I think. I can not find the site again, or course, but I am trying to figure out what the sander make and model were. It looked like a very nice but small sander and I thought at the time I should investigate more into it. So does anyone have any idea of what the sander might have been and what the model might have been? Thanks for any help, Chuck |
|
| Author: | Leftyprs [ Sun Jul 21, 2013 5:16 am ] |
| Post subject: | Re: What was the sander? |
Chuck, I believe this is the sander you are talking about. It's a Craftsman, and I put a link to the website you probably saw it on below the pic. http://kennethmichaelguitars.com/secrets.html |
|
| Author: | Chuck [ Sun Jul 21, 2013 1:54 pm ] |
| Post subject: | Re: What was the sander? |
That is it and that is also the website. Thank you very much! I spent over an hour looking for it. I actually went back to his website and somehow I did not find it there. So thank you again for this. Now I need to see if Craftsman still sells it as it just looked like a great sander for building. Chuck |
|
| Author: | Chuck [ Mon Jul 22, 2013 12:31 am ] |
| Post subject: | Re: What was the sander? |
Went to sears today to see if I could buy one of these sanders. They are no longer made I was told. So I guess I can watch Craigslist and ebay unless anyone knows of where I can purchase one or something like it. Chuck |
|
| Author: | John A [ Mon Jul 22, 2013 10:00 am ] |
| Post subject: | Re: What was the sander? |
have you thought about the multitool - I have one of these and it is pretty useful when you need a small sander 
|
|
| Author: | Chuck [ Sat Jul 27, 2013 11:35 am ] |
| Post subject: | Re: What was the sander? |
John A wrote: have you thought about the multitool - I have one of these and it is pretty useful when you need a small sander Yes I have something very similar but if I am not careful I get a crease where I am trying to sand so I was looking for the one with the three wheels which apparently doesn't do this. Thanks for your suggestion. Chuck |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|