| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Resaw 16" wood http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40695 |
Page 1 of 1 |
| Author: | Clinchriver [ Wed Jun 19, 2013 6:35 pm ] |
| Post subject: | Resaw 16" wood |
Local woodworker gave me this piece of Honduran Mahogany. One of his customers father made mahogany speedboats in the 1950's and this is out of his stash  Does anyone have resaw capability for 16" wood? And wood:) you be willing to do the job? I can get two nice one piece backs out of one piece. |
|
| Author: | klooker [ Wed Jun 19, 2013 6:55 pm ] |
| Post subject: | Re: Resaw 16" wood |
I think I can but I need to double check. Never done anything that wide. I'm out of town & can't check until next week. I'll let you know if no one else steps up. FWIW, Mahogany is one of the easier woods to resaw as compared to many of the rosewoods. Kevin Looker |
|
| Author: | Herr Dalbergia [ Thu Jun 20, 2013 2:08 am ] |
| Post subject: | Re: Resaw 16" wood |
I can, but i am in Germany..... |
|
| Author: | donny gilliam [ Thu Jun 20, 2013 4:44 pm ] |
| Post subject: | Re: Resaw 16" wood |
if you can find someone with a woodmizer sawmill he can do it.I have one but I live about 40 miles north of Raleigh NC. Let me know if you need to know how. Donny Gilliam |
|
| Author: | Dkeddy27 [ Thu Jun 20, 2013 6:31 pm ] |
| Post subject: | Re: Resaw 16" wood |
I would check with your local mill shop. Check and see if they have a horizontal bandsaw mill with a conveyor belt type feed. That type of saw has great results! |
|
| Author: | klooker [ Wed Jun 26, 2013 1:24 pm ] |
| Post subject: | Re: Resaw 16" wood |
I just checked my saw & I can. PM me if you would like to pursue. Kevin Looker |
|
| Author: | wbergman [ Wed Jun 26, 2013 4:12 pm ] |
| Post subject: | Re: Resaw 16" wood |
http://www.timberlinemag.com/articledat ... cleID=2556 |
|
| Author: | Clinchriver [ Wed Jun 26, 2013 4:43 pm ] |
| Post subject: | Re: Resaw 16" wood |
Thanks for the replays, I can get one piece backs all day long from Hibdon. I'll resaw this and call Hibdon when I want to do a J-45. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|