| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Side Template for J-45? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40690 |
Page 1 of 1 |
| Author: | George L [ Wed Jun 19, 2013 12:33 pm ] |
| Post subject: | Side Template for J-45? |
Anyone have the measurements for making a side template for a J-45? Thanks, |
|
| Author: | sdsollod [ Thu Jun 20, 2013 9:45 am ] |
| Post subject: | Re: Side Template for J-45? |
Bump... I'd like that too. |
|
| Author: | Joe Beaver [ Thu Jun 20, 2013 3:11 pm ] |
| Post subject: | Re: Side Template for J-45? |
If I had access to one I'd be happy to get you what you need. Unless someone posts the info you might want to consider a trip to the music store. I have done that. I just tell them I would like to take a few measurements with a plastic ruler, and they said no problem. |
|
| Author: | Rodger Knox [ Thu Jun 20, 2013 4:16 pm ] |
| Post subject: | Re: Side Template for J-45? |
Print this out on 24"x36" paper. Measured from a 1956 J-50, which was the natural finish version of the J-45 at that time. I've also got CAD files... |
|
| Author: | George L [ Thu Jun 20, 2013 6:22 pm ] |
| Post subject: | Re: Side Template for J-45? |
Thanks! |
|
| Author: | aqualibguitars [ Fri Jun 21, 2013 12:36 pm ] |
| Post subject: | Re: Side Template for J-45? |
Hello sir can u email me autocad file of J-45 ? aqualibguitars@yahoo.com |
|
| Author: | Rodger Knox [ Fri Jun 21, 2013 12:44 pm ] |
| Post subject: | Re: Side Template for J-45? |
I don't generally work in AutoCad, but I can probably get to converting it this weekend. Which Version do you need? |
|
| Author: | aqualibguitars [ Fri Jun 21, 2013 4:05 pm ] |
| Post subject: | Re: Side Template for J-45? |
thanks for ur quick reply sir i need autocad2004 version will be grateful to u |
|
| Author: | aqualibguitars [ Wed Jul 03, 2013 12:17 am ] |
| Post subject: | Re: Side Template for J-45? |
Hello sir thanks for the autocad file of J50. i tried to contact u. but ur email bounced back 2 times really thanks any way. if u need rosewood u can contact me anytime |
|
| Author: | Rodger Knox [ Wed Jul 03, 2013 10:10 am ] |
| Post subject: | Re: Side Template for J-45? |
Glad to help, and glad you were able to read the files. I'm just getting back to AutoCad after using another design software for 20 years. I've learned it twice before, but versions 2.1 and 10.2 were a lot easier! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|