| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Scale question on "zero" fret http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=40266 |
Page 1 of 1 |
| Author: | WudWerkr [ Sun May 05, 2013 6:09 pm ] |
| Post subject: | Scale question on "zero" fret |
Ok Dumb Question here probably , But I dont know the answer . 12 string , zero fret epi repair . Is the scale measured from the 0 fret to the 12th or the nut ? 0 fret is almost 3/16 from nut to center of the fret .. If i measure it that way its very close , if I measure it from the nut... well not so much ... Logic says it should be from 0 fret to twelfth fret and twelfth to bridge saddle .. 
|
|
| Author: | Clinchriver [ Sun May 05, 2013 6:21 pm ] |
| Post subject: | Re: Scale question on "zero" fret |
From the zero fret. |
|
| Author: | WudWerkr [ Sun May 05, 2013 6:35 pm ] |
| Post subject: | Re: Scale question on "zero" fret |
Clinchriver wrote: From the zero fret. I thunked that was right , but have never done zero fret work before Thanks ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|